Overview
The ARB OMEGS11 is a greaseable shackle and pin kit from ARB 4×4 Accessories, part number OMEGS11. Its bolt-together assembly is designed to avoid out-of-angle pin problems at the side plate.
Key features
- Greaseable shackle pins
- Bolt-together shackle assembly
- Two grease outlet holes on each pin
- Direct fit designation for OMEGS11
Trail use and grease upkeep
A shackle kit does more than hold the spring. It sets the rear suspension’s length and angle, so when the shackles wear, the axle can move in ways that affect steering feel and tire wear. Pins that have seen years of mud and water often seize in the bores, which is why a kit with greaseable pins is a practical upgrade over sealed hardware.
Bolt-together shackles are helpful when the old pins are stuck, because the assembly can be taken apart and cleaned instead of being pressed out with force. When installing, keep the fasteners clean, use new hardware where the kit includes it, and re-check the bolts after the first drives. Shackle plates that show cracks or flexing should be replaced rather than reused.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEGS11 |
| UPC | 881348005960 |
| Grease outlets | Two per pin |
| Fit type | Direct fit |
Vehicle fitment
The OMEGS11 carries a direct fit label without a year, make, model or trim. Compare the kit against your current shackles before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a shackle and pin set. Check the package contents against your installation before starting.



