Overview
The Warrior 315 is a leaf spring shackle kit for the 1976–1983 Jeep CJ5 and the 1976–1986 Jeep CJ7. It fits the Base, Golden Eagle, Laredo, Limited and Renegade trims of the CJ5, and the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims of the CJ7.
This version is listed in gold zinc finish. The shackles are MIG-welded and jig-built, and they come complete with the mounting hardware needed for installation. The kit lifts one end of the vehicle from 1/2 inch up to 2.5 inch, depending on the application.
Key features
- MIG-welded, jig-built shackles
- Mounting hardware included
- Gold zinc finish
- Lift range of 1/2 inch up to 2.5 inch
- Kits come in pairs
Choosing and fitting shackles
Leaf spring shackles on older Jeep CJs spend their lives exposed to road grime, water and salt, so the pivot points often show rust and wear before the springs do. When comparing shackle kits, look at how the shackles are built and finished, since the finish affects how well the parts hold up outdoors. A gold zinc coating is one point of comparison when you weigh coatings across brands.
Because a CJ’s leaf springs are mounted in fixed positions, changing the shackle angle affects axle position and the feel of the steering. After installation, check the front alignment and driveline angles, then recheck the mounting bolts after the first few drives. Keep the old hardware until you have confirmed the new kit fits your frame and spring eyes correctly.
- Inspect spring eyes and frame mounts for cracks
- Grease new bushings as the instructions direct
- Keep a torque wrench handy during the first drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | 315 |
| UPC | 63414603150 |
| Product type | Leaf spring shackle kit |
| Lift height | 1/2 inch up to 2.5 inch, depending on application |
| Finish | Gold zinc |
| Quantity | Pair |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade trims) and the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims).
Jeep Wrangler and Scrambler models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit raises the vehicle, recheck driveline angles and front alignment after the install. Support the vehicle on jack stands before loosening the original hardware.
What’s included
The shackle kit as a pair, with the mounting hardware needed for installation.









