Select your vehicle

Alloy USA Axle Shaft

Alloy USA

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1995–2000 Toyota Tacoma (notes read 95.5-00)
  • Rear axle shaft in chromoly
  • Alloy USA part number 23102C

Description

Overview

The Alloy USA 23102C is a chromoly rear axle shaft for the 1995–2000 Toyota Tacoma. It carries engine torque from the differential out to the wheel hub, so it is the part to check when a Tacoma loses drive at one rear wheel or when an owner wants a chromoly replacement.

The spline count, overall length, heat-treat process and finish are not known for this part number. Compare the spline count and length of the old shaft with the new one before installing. The brand is Alloy USA, the part number is 23102C, the shaft sits at the rear, and the material is chromoly. The year range is 1995–2000.

Key features

  • Chromoly rear axle shaft
  • Rear axle position
  • Alloy USA part number 23102C
  • Application noted as 95.5-00 Toyota Tacoma
  • Replacement-style shaft for Tacoma rear axles

Before you install a rear shaft

A rear axle shaft works as one chain: the differential drives it, the bearing supports its outer end, and the hub carries the wheel. When one side loses drive, the shaft or its splines are often the cause, but a worn bearing or damaged axle seal can produce similar symptoms. Look at the spline ends for twisting, pitting or rounding before blaming the shaft alone.

Chromoly is a steel alloy often chosen for strength, but a shaft is only as good as its fit. Measure the old part’s overall length and spline count and compare them carefully. Brake parts and wheel-speed components sit close to the hub, so check them while the shaft is out.

  • Check the axle seal for leaks when the shaft is removed
  • Replace the bearing and seal if they show wear
  • Clean the hub and spline surfaces before fitting
  • Use new retaining hardware where the design calls for it

Specifications

Brand Alloy USA
Part number 23102C
UPC 804314204433
Position Rear
Material Chromoly
Product type Rear axle shaft

Vehicle fitment

It fits these Toyota Tacoma trims from 1995 to 2000.

  • 1995–2000 Toyota Tacoma (Base, Limited, Pre Runner, SR5)

It fits only the 1995–2000 Tacoma. Later Tacoma generations, the 4Runner and other Toyota trucks are outside this part number. Match your truck’s year, model and trim before ordering.

Installation notes

Alloy USA gives no fitting instructions for the 23102C. Because a rear axle shaft sits behind the wheel, brake and axle bearing, anyone unfamiliar with axle work may prefer to have a shop pull and replace it.

SKU: ALY23102C Category:

Specification

Shipping weight 18.30 lbs
Package dimensions 29.50 × 7.00 × 7.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2000Base, Limited, Pre Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Alloy USA 23102C fit my Toyota Tacoma?

Yes, if your truck is a 1995–2000 Toyota Tacoma in Base, Limited, Pre Runner or SR5 trim. Later Tacoma generations and the 4Runner are not covered by this part number.

Is the 23102C for the front or rear axle?

Rear. Alloy USA labels the 23102C a rear axle shaft, so it is not intended for the Tacoma's front axle or for the front driveline.

What is the 23102C axle shaft made of?

Chromoly. The material is chromoly, but the alloy grade, heat-treat method and spline count are not known. Compare the spline count and length with your old shaft before installing.

How can I tell a rear axle shaft is worn?

Common signs include a clicking noise on turns, vibration under power, grease at the hub, or a wheel that does not turn with the axle in gear. Lift the vehicle and inspect the splines and shaft for twisting or cracks. A shop can confirm the diagnosis.

Should the axle bearing and seal be replaced with the shaft?

Often yes. Removing the shaft exposes the bearing and seal, and both wear with age and miles, so inspecting them at the same time saves a second job. Replace any part that shows roughness, play or leakage.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon