Overview
The Axia Alloys modular roll cage strap clamp, part number MODCL1.625-BK, is a black billet clamp in the 1.625 inch size shown in the model name. It is a low profile strap clamp for roll cage tubing.
These strap clamps are the core of the Axia Alloys Modular Clamping System. Axia says they snap around any size of roll cage, and the low profile keeps clearance under windshields, roofs and other accessories.
Key features
- Low profile strap clamp
- Core of the Axia Alloys Modular Clamping System
- Billet construction
- Black finish
- Keeps clearance under windshields, roofs and accessories
Universal fit and cage tubing
A universal fit clamp is set by the tube it wraps, not by the vehicle it sits on. That makes the tubing diameter the first measurement to take. Two cages from different builders can carry the same clamp differently depending on wall thickness and bend radius. Measure the tube at the mounting spot, not just the cage’s overall dimensions.
Because the clamp relies on tubing, changing the cage or adding bars can change where clamps fit. If you rework the roll cage, re-check every clamp afterward. Keep clamp positions on straight sections where possible, since bends can reduce contact and make even tightening harder to achieve.
- Measure tubing at the exact mounting spot
- Use straight sections where possible
- Re-check clamps after any cage changes
Specifications
| Brand | Axia Alloys |
|---|---|
| Part number | MODCL1.625-BK |
| Type | Modular roll cage strap clamp |
| Size | 1.625 inch (per the model name) |
| Material | Billet |
| Finish | Black |
| Profile | Low profile |
| System | Axia Alloys Modular Clamping System |
| Fitment | Universal fit label; not vehicle specific |
Vehicle fitment
It is a universal fit clamp that attaches to roll cage tubing rather than to a specific vehicle.
Check the tubing diameter of your cage against the 1.625 inch size before ordering.
What’s included
One strap clamp. Check any mounting hardware you need against your installation before starting.











