Overview
The FUEL Off-Road Vector D579 20×9 with an 8×180 bolt pattern, part number MHTD57920901857, is a windowed aluminum wheel in matte black. It measures 20 inches across and 9 inches wide, and it carries a different offset and bore than the 6×135 and 6 on 5.5 versions of the same line.
The 8×180 bolt pattern, offset 20 and center bore 124 are the measurements to compare with your hub. The Vector D579 line is designed for trucks, SUVs and off-road driving, and it is offered in many bolt pattern and offset combinations.
Key features
- 20-inch diameter and 9-inch width
- 8×180 bolt pattern
- Offset of 20 and backspacing of 5.8
- Center bore of 124
- Windowed style in matte black, aluminum construction
Fitment checks before buying
A wheel’s fit starts with the hub it mounts to. The bolt pattern, center bore and seat type must match, and any mismatch can cause vibration or a wheel that will not sit flat. Hub-centric rings can close a small center bore gap when the wheel bore is larger than the hub, but they should be sized to the hub rather than guessed.
Clearance matters as much as the bolt pattern. Check the wheel’s inner face against the brake caliper and control arms, and the outer edge against the fender at full suspension travel. Turn the wheel by hand at full lock before final tightening, and recheck lug torque after the first few drives on the trail.
- Confirm seat type matches the lug nuts
- Check brake caliper and control arm clearance
- Verify the bolt pattern before mounting tires
Specifications
| Brand | FUEL Off-Road |
|---|---|
| Part number | MHTD57920901857 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8×180 |
| Offset | 20 |
| Center bore | 124 |
| Backspacing | 5.8 |
| Style | Windowed |
| Finish | Matte black |
| Construction | Aluminum |
Vehicle fitment
No vehicle fitment is named for this wheel. Fit comes from the hub and the clearance around it, so match the 8×180 bolt pattern and 124 center bore to the vehicle first. The offset of 20 places the mounting face differently from the offset of 1 on other Vector D579 sizes, so check suspension and fender clearance before fitting.
Backspacing of 5.8 is the distance from the mounting face to the back lip of the wheel. It changes how the rim sits inside the wheel well.
What’s included
This item is one wheel.
Not included: Check the package contents against your installation before starting, including tire and lug hardware.











