Overview
The Crown Automotive 4796967 is a pre-assembled shift mode synchronizer for the NP231 transfer case. It is a factory-style replacement for the synchronizer used in 1987–1995 Jeep Cherokee (XJ) and Wrangler (YJ) vehicles with the NP231, and it arrives as one assembled unit.
The assembly includes the center hub, the outer sliding hub, spring clips and synchronizer plates. The part is marked as box #12 in the diagram, and the original case numbers it fits include 52097893, 52097894 and 53008210.
Key features
- Pre-assembled, so the hub, sliding hub, clips and plates come together
- Includes center hub, outer sliding hub, spring clips and synchronizer plates
- Factory-style design for the NP231 transfer case
- Crown lists case numbers for YJ 1994–95 applications
Case numbers and fitting checks
A shift mode synchronizer helps the transfer case change between gear modes smoothly by matching speeds before the sliding hub engages. Wear on the synchronizer rings or plates can cause grinding, hard shifts or a lever that will not fully seat in gear. Problems like these are often traced to the shift linkage, the shift fork or the transfer case fluid, so check those parts too.
Because the case number ties the unit to a specific transfer case, confirm it against the number stamped on your own case before fitting. Work on a clean bench, keep the parts in order and check the splines for wear. Replacing a worn shift fork at the same time is often sensible, since it carries the same load. Inspect seals for leaks once the case is closed up.
- Grinding when changing modes
- Shift lever that will not fully seat
- Worn shift fork or linkage
- Leaking seals after reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4796967 |
| Part type | Shift mode synchronizer, pre-assembled |
| Transfer case | NP231 |
| Includes | Center hub, outer sliding hub, spring clips, synchronizer plates |
| Diagram reference | Box #12 |
| Case numbers (YJ 1994–95) | 52097893, 52097894, 52097695, 52098361, 52098362, 52098563, 53008210 |
Vehicle fitment
It fits the 1987–1995 Jeep Cherokee (XJ) and the 1987–1995 Jeep Wrangler (YJ). The 1987–1996 Cherokee XJ is also covered, and the Comanche is not covered. Confirm the transfer case and case number on your vehicle before ordering.
Compare the case numbers listed above with the number on your transfer case, especially for 1994–95 Wrangler YJ models.
Installation notes
The synchronizer arrives pre-assembled, so the hub, sliding hub, clips and plates are not sold as separate parts. Confirm the NP231 case and the case number before fitting, since the fit depends on specific case numbers.
What’s included
The pre-assembled synchronizer, with its center hub, outer sliding hub, spring clips and synchronizer plates.










