Overview
The Pro Comp transmission drop bracket, part number 90-5149B, lowers the transmission on a lifted Dodge Ram to restore driveline angles. It fits the 2006 to 2007 Dodge Ram 2500 and Ram 3500, and it is a direct fit bracket.
Lifting a truck raises the transmission relative to the driveshaft, which can bend the driveline angles beyond the normal range. This bracket is designed to make the lowering operation simple. The UPC for this part is 614901119091.
Key features
- Lowers the transmission to correct driveline angles
- Direct fit design for Ram 2500 and 3500
- Fits the 2006 to 2007 model years
Driveline angles after a lift
A lift raises the transmission and transfer case relative to the driveshaft, which steepens the joint angles. Steep angles increase vibration, wear the universal joints faster and can load the output bearings. A drop bracket moves the transmission back toward its original position, so the driveshaft works closer to its designed range.
After installation, check the driveline angles with the truck back on the ground and under typical load. Look for vibration at highway speed, noise from the joints and any movement at the mounts. Lowering a transmission also changes the position of the shifter and nearby linkages, so confirm that they still operate freely.
- Check joint angles at ride height
- Listen for joint noise at highway speed
- Confirm shifter and linkage travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 90-5149B |
| UPC | 614901119091 |
| Type | Transmission drop bracket |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006 to 2007 Dodge Ram 2500 and the 2006 to 2007 Dodge Ram 3500, across the trim levels of those years. Confirm the model and year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the transmission while the stock mount comes off, and confirm the new bracket seats against the crossmember before tightening. Check the driveline angles once the truck is back on the ground.
What’s included
The bracket is supplied by itself, without separate hardware.






