Overview
The Energy Suspension 3.1108G is an adapter mount that bolts to an NV3550 transmission so the stock Peugeot muffler support and rubber mount can be kept in use.
The plate offsets the Peugeot rubber mount forward from the NV3550 mount holes so the rubber mount lines up with the stock crossmember slots. The slots may need to be elongated slightly to line up.
Key features
- Adapter mount for an NV3550 transmission
- Keeps the stock Peugeot muffler support and rubber mount
- Offsets the rubber mount forward from the NV3550 mount holes
- Black with a zinc finish, in performance polyurethane
- Part number 3.1108G with UPC 703639276609
Mount alignment and installation
An offset mount adapter is a practical way to keep factory parts in service when a transmission changes. The main concern is alignment: the rubber mount has to sit in the crossmember without binding or pulling the drivetrain out of position. Check clearance around the exhaust hanger and the muffler support before final tightening, since moved parts can rub.
Polyurethane mounts transmit more vibration than rubber, so expect some added noise on the road. Inspect the mount and crossmember bolts after the first few drives, and retighten them once the drivetrain has settled. Keep spare fasteners and the stock hardware organized during fitting. Look for cracked crossmember welds, sagging mounts or metal-to-metal contact at the crossmember as signs that the setup needs another look.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 3.1108G |
| UPC | 703639276609 |
| Color | Black |
| Finish | Zinc |
| Material | Performance polyurethane |
| Transmission | NV3550 |
| Rubber mount | Peugeot |
Vehicle fitment
The mount is designed for an NV3550 transmission and a Peugeot rubber mount. Match your vehicle’s year, model and trim to that setup before ordering.
Check the transmission and crossmember match before fitting, since the mount is intended for the NV3550 transmission. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The stock crossmember slots may need to be elongated slightly to line up with the offset Peugeot rubber mount. Fit the adapter mount to the NV3550 before checking alignment with the crossmember.








