Overview
The Energy Suspension 3.1108R is an adapter transmission mount that bolts to the NV3550 transmission, part number 3.1108R. It lets you keep the stock Peugeot muffler support and rubber mount by offsetting that rubber mount forward from the NV3550 mounting holes so it lines up with the stock crossmember slots.
Fitment is listed across Chevrolet and GMC C-series, K-series, R-series and S-series trucks and Suburbans, Blazer and Jimmy models, El Camino and Sonoma, plus Jeep Wrangler (YJ) models, with model years from 1965 to 2001.
Key features
- Adapter plate that bolts to the NV3550 transmission
- Keeps the stock Peugeot muffler support and rubber mount
- Offsets the rubber mount forward to line up with the crossmember slots
- Performance polyurethane, zinc finish, red
Adapters and crossmember alignment
An adapter mount solves a fit problem rather than changing how the drivetrain works. When a transmission is swapped or its mounting holes sit in a different place than the frame expects, an offset bracket moves the rubber cushion to the correct location. The result depends on accurate measurement. Before fabrication or slotting the crossmember, measure the distance between the transmission mount points and the crossmember slots, and confirm the transmission stays level under load.
Crossmember modifications should be done carefully, since the slots carry real weight. Remove the stock mount and check the crossmember for cracks near the holes before enlarging anything. Keep the modified area clean, and inspect the adapter’s bolts after the first few drives, because the offset load can loosen them. A firmer mount material transmits more vibration than stock rubber, so the new position is worth considering when choosing a mount.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 3.1108R |
| UPC | 703639276616 |
| Type of mount | Adapter transmission mount |
| Transmission | NV3550 |
| Fitment type | Direct fit |
| Mount material | Performance polyurethane |
| Finish | Zinc |
| Color | Red |
Vehicle fitment
Models outside these years, and Jeep models other than the Wrangler YJ, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stock crossmember slots may need to be elongated slightly to line up with the offset Peugeot rubber mount, so plan for that before you start the installation.
What’s included
Not included: the stock Peugeot rubber mount and muffler support, which the adapter is designed to keep. Check the package contents for bolts and hardware before starting the installation.









