Limiting Strap
Showing 13–24 of 34 resultsSorted by popularity
-
-
-
-
-
-
-
Limiting Strap
Trail Gear 8 Inch Rock Assault Axle Limit Strap – 111271-KIT
- Trail Gear 8 in Rock Assault axle limit strap, part 111271-KIT
- Six-layer nylon webbing with 4130 Chromoly Steel buckles
- Half-inch mounting holes; length tolerance +/- 1/4 inch
- Universal fit, sold individually
SKU: TGI111271-KIT -
-
What a limit strap does
On a vehicle with coil springs, downward axle travel is normally limited by the shock, which can be damaged if it extends too far. When the vehicle lifts a wheel on rocks or hits a washout, the axle can drop beyond that limit, unseating springs or over-extending shocks, brake lines and driveshafts. A limit strap is a strong webbing strap that connects the axle to the frame and stops downward travel at a chosen point. It is a simple way to protect parts and keep the springs in position.
Choosing a length
Strap length is measured in inches and varies widely in this category, from 8 inches up to 32 inches. The right size depends on the shock's extended length, the position of the mounts and your lift height. The strap should be slightly shorter than the point at which the shock, brake line or driveshaft would be stressed, so measure with the vehicle at full droop. Too long and it does nothing, while too short can limit articulation and flex.
- Measure from axle bracket to frame bracket at full droop, rather than guessing from lift height.
- Check brake hose, track bar and driveshaft slip travel at the strap limit.
- Pair front and rear axles sensibly so each is protected.
Mounting and hardware
Limit straps need solid mounting points. Kits typically include the strap and brackets or hardware, while some are sold as a strap alone. Mounts should bolt or weld to strong frame or axle locations, since a strap only works as well as what it is attached to. Use the correct grade of bolts and lock nuts, and avoid drilling into structural frame areas without guidance. Welding on a frame or axle should be done by a qualified fabricator.
Maintenance
Inspect straps regularly for fraying, cuts, mud saturation and UV damage, and replace any that show wear. Confirm fitment for your exact year, make and model, and check the suspension manufacturer's specifications and any lift kit instructions before choosing a length.
It also helps to inspect the mounting points each season, since mud and rock strikes can bend brackets. Straps are wear items, so carrying a spare for remote trips is reasonable. Always read the lift kit's instructions about whether limit straps are required.
Materials and construction
Limit straps are made from heavy nylon or polyester webbing, often with stitched loops or metal end fittings, and they must resist abrasion, mud and UV. Sewn loops should have dense stitching and no loose threads. Metal brackets and shackles need a strength rating suitable for the loads from a dropping axle, which can be sudden and severe. Look for kits that include appropriate hardware, since weak bolts defeat a strong strap.
Measuring and confirming fitment
Use a floor jack to lift the frame until the wheel hangs at the desired maximum droop, then measure the distance between the strap mounting points. Subtract the length needed for the loops or end hardware to estimate the strap length. Make sure the shock is not stretched beyond its listed extended length at that point, and that the brake hose, ABS wire and sway bar links have slack. Test both sides, since the frame and axle may not be symmetrical. If a strap sits near the exhaust, a heat shield may help.
Mistakes to avoid
Do not mount straps where they rub the tire or brake line, and do not tighten the bolts without a check of shock clearance.
Popular Limiting Strap brands
Limiting Strap FAQ
What does a limit strap do?
It stops downward axle travel at a set length, preventing shocks, springs, brake lines and driveshafts from overextending when a wheel droops. It is common on lifted coil-spring vehicles used off-road trails.
How do I choose limit strap length?
Measure from the axle mount to the frame mount at full droop, then pick a length that stops travel before any component is stressed. Check the shock's extended length and brake hose slack.
Do limit straps reduce flex?
They limit downward droop only. If the strap is set too short it can reduce articulation, so measure carefully. A correct strap protects parts while allowing the travel the suspension needs.
Can limit straps be used with leaf springs?
They are mostly used with coil springs, because leaf spring setups limit droop differently. Check your suspension manufacturer's guidance before adding one. Leaf spring packs have different travel limits, so ask the manufacturer.





