Select your vehicle

Fog Light Mounts holds the brackets and adapter plates that put LED pods in the factory fog light pockets or on the lower bumper. Rigid Industries supplies most of them, from universal Dually mounts and extensions to stainless steel kits for Ford Super Duty, F-150 Raptor and GM 1500 and 2500/3500 fog cavities, while Baja Designs offers Squadron fog mounting kits with wiring adapters for Toyota, Ford and GM trucks. Lights are not included. Match the mount to your light and truck below.

Showing 1–12 of 22 resultsSorted by popularity

Why a dedicated fog mount

The factory fog lamp pocket in a truck bumper is the natural home for a pair of LED pods: it sits low, aims forward and already has wiring and a dash switch. The catch is that aftermarket pods are a different size and shape from the halogen lamps they replace. A fog light mount is a steel or stainless plate cut to fill the pocket, with a stud pattern for a specific light. The kits here are built around Rigid D-Series lights, including the Dually and D2, and Baja Designs Squadron series lights, so the first decision is which light you plan to run, and the second is the bracket for your truck.

Vehicle-specific kits

Most listings name a vehicle and a light. Rigid's kits cover the 2008 to 2016 Ford Super Duty, the 2017 and newer Super Duty in single and dual configurations, the 2010 to 2014 F-150 SVT Raptor with two D-Series lights per opening, and GMC 1500 and 2500/3500 fog cavities across several year ranges. Baja Designs kits for the 2004 to 2014 F-150, Tundra and Tacoma, the 2010 to 2018 4Runner, Tacoma and Tundra, and the Colorado, Canyon, Silverado and Sierra include two brackets, a wiring adapter that plugs into the factory fog harness, and in some cases anti-glare filler pieces. The adapter means the lights work from the stock switch with no splicing.

  • Check the year range carefully. Bumper designs change mid-generation and a 2011 to 2014 GMC HD kit does not fit the 2015 bumper.
  • Trucks with a factory off-road package, chrome package or body-color bumper sometimes have different pockets. Compare photos of your bumper with the kit.
  • Dual-light kits fit two pods per side; single kits center one larger pod. The second pod needs the extra wiring.

Universal mounts and extensions

If your bumper is aftermarket or the pocket is an odd shape, Rigid's universal Dually fog mount, a four-piece kit, and the extended Dually mount with a 3 inch extension let you fabricate a solution. The multi-mount bracket here holds up to three fog light pads and bolts on without drilling. Universal brackets hold the light; you supply the location, so test fit with the light in place and check that nothing hits the bumper on compression or the tire at full lock.

Material and finish

Look for 304 stainless steel or heavy steel with a powder coat. Stainless resists road salt behind a bumper where water collects; powder coat over stainless, as on the Rigid plates, is mainly cosmetic. Plates with a drain path or open bottom shed water and mud rather than holding it against the light housing.

Wiring, aiming and legality

Fog lights are wired to come on only with the headlights on most trucks, and the factory switch limits them to low beam. If you use a plug-and-play adapter, keep that behavior. Aim fog pods low and wide so the cutoff is below oncoming drivers' eyes; a fog pattern, not a spot, belongs in this location on public roads. Rules on auxiliary light color, height and use vary by state, so check local regulations. Confirm the kit matches both your light model and your exact truck year and bumper before choosing.

Popular Fog Light Mounts brands

Fog Light Mounts FAQ

Do fog light mounts come with the lights?

No. Every kit in this category is brackets, hardware and sometimes a wiring adapter. The LED pods are a separate purchase. Buy the mount for the specific light you intend to use, since Rigid D-Series and Baja Designs Squadron lights have different bolt patterns and housing sizes.

Will the factory fog light switch still work?

With kits that include a plug-and-play wiring adapter, yes. The adapter connects the factory fog harness to the LED pod connector and the dash switch controls them as before. Kits without an adapter need a harness and relay, especially if two pods per side draw more current than the stock circuit was built for.

Can I put a spot beam in the fog pocket?

You can mount one, but for street use a wide fog or driving pattern aimed low is the appropriate choice, and many states restrict forward-facing auxiliary beams. Save spot beams for a bumper bar or A-pillar mount and switch them on only off road.

What if my truck has an aftermarket bumper?

Use a universal mount such as the Rigid Dually mount or a multi-mount bracket, or check whether the bumper maker offers its own light plates. The truck-specific fog pocket kits are shaped for factory bumpers and rarely fit aftermarket ones.