Floor Mats & Cargo Liners
Showing 109–120 of 143 resultsSorted by popularity
-
Floor Mats
Nifty Catch-It Rear Floor Mat (Black) – 383039-B
- Listed fit: 1998-2010 Ford Ranger (Edge, FX4, STX, Splash, Sport, Tremor, XL, XLT)
- Nifty Catch-It custom molded rear floor mat in black, part number 383039-B
- Vyram material that holds up to mud, snow, rain and chemicals
- Over-the-hump, direct-fit rear position
- Limited lifetime warranty, made in the U.S.A.
SKU: NIF383039-B -
Floor Mats
Nifty Catch-It Rear Floor Mat (Tan) – 383022-T
- Fits 2007–2013 Toyota Tundra Base, Limited and SR5 trims
- Nifty Catch-It rear floor mat, part number 383022-T, tan
- Custom molded one-piece floor mat made from Vyram material
- Raised lip and ridges help hold back mud, snow and spills
- Limited lifetime warranty; made in the U.S.A.
SKU: NIF383022-T -
-
Floor Mats
Nifty Catch-It Front Floor Mat (Tan) – 283071-T
- Fits select 2009 to 2017 Dodge Ram 1500, 2500 and 3500 pickups in the trims covered by the fitment section
- Front floor mat, tan, custom molded from Vyram material
- Nifty part number 283071-T, sold as a pair
- Limited lifetime warranty, made in the U.S.A.
SKU: NIF283071-T -
-
-
-
-
-
Floor Mats
Jeep Front Rubber Floor Mats (Black) – 82204673AB
- Genuine Jeep front rubber floor mats in black, sold in pairs
- Part number 82204673AB, front location
- Textured backing and deep grooves to retain mud, snow and water
- Fits 1999–2006 Jeep Wrangler TJ and 2004–2006 Wrangler LJ
SKU: JEP82204673AB
Liners versus mats
Carpet takes a beating in a vehicle that sees mud, snow, sand and wet gear. Floor liners are molded to the shape of the footwell and have raised edges that contain liquids. Flat or lightly contoured slush mats are simpler and often include ribs to trap dirt and water. Cargo liners do the same job for the rear load area, protecting carpet from tools, recovery gear and coolers.
What to compare
- Coverage: front pair, rear pair, second row, center hump or a full set. Some vehicles need the hump piece separately.
- Material: rubberized or thermoplastic materials stay flexible in cold weather and wipe clean. Check that the surface is not slick under the driver's foot.
- Edge height: deeper walls hold more water but need more room around seat tracks.
- Anchoring: backing nubs, factory retention posts or hooks help keep the mat from sliding.
Fitment details that matter
Floor liners are made for specific body styles. Two-door and four-door vehicles have different floor shapes, and details such as a manual transfer case shifter, driver foot rest, floor-mounted seat bolts or a particular trim package can change which part is correct. The sample listings in this category note items like cab configuration and shifter conditions, so read them carefully and confirm fitment for your exact year, make and model.
Installation and care
Installation is normally just placement, but remove old mats first. Stacking a new liner on top of a loose mat can let the pedal area become obstructed, which is a safety hazard. Make sure the driver side mat is secured by the factory retention system and does not interfere with pedal travel in any position.
To clean, remove the liners, hose them down, scrub with mild soap and let the carpet underneath dry fully so moisture does not become trapped and cause odor or rust. A liner extends the life of carpet but does not replace sealing leaks, so address any door, window or drain plug leaks directly.
Weigh seasonal needs as well. Owners in wet or snowy regions often prefer deeper-walled liners with full coverage, while those who mostly carry gear may care more about a cargo liner. Mixing brands between front and rear is common, though matching colors makes the interior look more consistent.
Materials and construction
Most custom liners are made from rubberized or thermoplastic compounds that are molded using a scan or template of the vehicle's floor. A good liner keeps its shape in heat and stays flexible in freezing weather, instead of cracking. Surface texture matters: raised ridges and channels move water toward the center, while a smooth top is easier to wipe. Backing nubs or spikes grip the carpet and prevent sliding, but they can leave marks on light carpet if dirt gets under them.
Factory-style slush mats are often made for specific Jeep models and fit within factory retention clips. Rugged Ridge liners vary in coverage and thickness, and some are trimmable. Cargo liners may include side walls that lift gear and fluids away from the carpet and seat backs.
Common mistakes to avoid
Do not order by a general vehicle name alone. Trim levels, seat types, manual or automatic transmissions and center console shapes change the footwell. Do not leave a liner loose where it might slide under the pedals. Also remember liners trap water, so empty them after heavy wet use and dry the carpet underneath if it becomes damp.
Popular Floor Mats & Cargo Liners brands
- Husky Liners (68)
- Rugged Ridge (21)
- WeatherTech (15)
- Jeep (12)
- Bestop (12)
- Nifty (10)
- Aries Offroad (2)
- Rough Country (2)
- BedRug (1)
- DirtyDog 4x4 (1)
Shop Floor Mats & Cargo Liners by type
- Floor Mats (104)
- Cargo Area Liners (32)
- Floor Center Hump Mat (7)
Floor Mats & Cargo Liners FAQ
What is the difference between a floor liner and a floor mat?
Liners are molded to the contours of the footwell and have raised edges that contain spills. Mats are flatter and simpler. Liners usually give fuller coverage and are more common for muddy or snowy use.
Will a floor liner fit both two-door and four-door models?
Usually not. Floor shapes differ by body style, so liners are made for a specific configuration. Confirm fitment for your exact year, make, model and cab or door configuration.
Is it safe to put a liner over my factory mat?
No. Layering can let the mat slip into the pedals. Remove the factory mat first and make sure the driver side liner is anchored and does not touch pedal travel.
How do I clean rubber floor liners?
Take them out, rinse with a hose, scrub with mild soap and a soft brush, then rinse and dry. Let the carpet underneath dry too before reinstalling to avoid odor and corrosion.










