Seats
Seats for Jeeps, trucks and other 4x4s, including front bucket and recliner seats, rear bench and fold-and-tumble seats, plus headrests. This category is for owners replacing worn factory seating or adding better support for long trail days. Brands include Corbeau, Bestop, Smittybilt and Rugged Ridge. Check each product page for features and part numbers, then compare the products below.

A long trail day is won or lost in the driver's seat. Worn factory foam, torn vinyl or a seat with no side support wears you out on off-camber climbs and washboard roads. This section covers replacement front and rear seats, plus the brackets, sliders, adapters and belts needed to bolt them in.
Seats are only half the job. Most universal seats bolt to a vehicle-specific bracket, often with a single or double locking slider, so the mounting bracket group is the largest here. Seat adapters fill gaps between a seat and an older floor, and the belt section adds 5-point latch and link restraints, harnesses and pads. Jeep CJ, YJ and TJ owners will find classic spice and black denim styles.
Shop seats and mounting parts
Popular seats and brackets
-
-
-
Seat Mounting Bracket
Corbeau Mitsubishi Seat Bracket with Double Slider – E1167
- Corbeau E1167 seat bracket with double locking sliders for the 1997 to 2000 Mitsubishi Montero
- Direct bolt-in with little to no modification.
- Black wrinkle powder coat finish
- Double sliders recommended for high stress driving
SKU: CBUE1167 -
-
-
Seats
Corbeau Safari Fold & Tumble Seat – Rear (Black Vinyl/Grey Cloth) – 60019
- Corbeau Safari rear fold and tumble seat, part number CBU60019
- Designed as a bolt-in replacement for CJ and YJ Jeeps
- Black vinyl with grey cloth, made to pair with the Moab front seats
- Also offered in vinyl/cloth combo and neoprene materials
SKU: CBU60019 -
-
Seat mounting and restraint reference
Mounting notes and specs from listed seats, brackets and belts. Seat bolt patterns vary by maker and model year, so match the bracket part number to both your seat and your vehicle.
Jeep seat adapter notes
| Smittybilt 44917 bucket seat | 1997 and newer need adapter brackets |
|---|---|
| Smittybilt 49517 Super Seat | CJ, YJ, TJ; 1997–02 need adapters |
| Rugged Ridge 13401.37 bucket | 1997–2002 TJ needs 13201.11 and .12 |
| Rugged Ridge 13401.37 bucket | Reuses the original mounting bolts |
| Smittybilt 44917 and 49517 | Seat hardware not included |
| Smittybilt 8017N rear seat | Brackets and hardware included |
Specs from listed products
| Smittybilt 41517 fold and tumble | 41" wide x 23" high |
|---|---|
| Bartact SB2X2-A-B harness | 2" x 2" straps, automotive buckle |
| MasterCraft 111144 and 113204 | 5-point latch and link |
| Misch JBBJK350P bracket | 3" more legroom, no drilling |
| Corbeau brackets | Black wrinkle powder coat finish |
| Corbeau Baja JP 26401WS | Wide stationary high-back |
Slider and bracket types
| How it works | Listed examples | |
|---|---|---|
| Single locking slider | One release locks one side | Corbeau Ford, Dodge, Toyota |
| Double locking slider | A bar links both locking slides | Corbeau E2226, E2227 |
| Side-specific bracket | Driver or passenger only | Corbeau E2226 / E2227, Misch |
| Seat adapter | Bridges seat to bracket or floor | MasterCraft 624405, 624501 |
Restraint types
| Anchor points | Notes | |
|---|---|---|
| Factory 3-point belt | Lap and one shoulder | Standard street restraint |
| 4-point harness | Lap plus two shoulders | No anti-submarine strap |
| 5-point latch and link | Adds a center crotch strap | Holds the lap belt in place |
| 6-point harness | Two leg straps | Common in race seats |
Measure before you order
- Your hip width and shoulder height against the seat's listed width
- Bolt spacing on the seat base and on the floor or riser
- Headroom with the new seat height plus any slider or bracket
- Belt buckle location: factory buckles often mount to the old seat
- Clearance for the shifter, e-brake handle and center console
- Side airbags or occupancy sensors in the factory seat
Harnesses must mount to a rated bar or anchor at the angle the maker specifies. Keep your factory 3-point belt usable on any vehicle driven on the street.
All Seats 216 parts
-
Seats
Smittybilt Front Super Seat Recliner (Spice) – 49517
- Spice reclining front seat for CJ, Scrambler, LJ, TJ and YJ Jeeps
- Contoured bucket seat in Spice denim vinyl
- Unlimited recline positions with an adjustable headrest
- Mounts to the factory seat slider and bracket
- 1997 to 2002 TJ models need adapter brackets; hardware not included
SKU: S/B49517 -
Seats
Rugged Ridge Standard Front Bucket Seat (Spice) – 13401.37
- Replacement front bucket seat in Spice vinyl for earlier Jeep restorations
- Non-reclining stationary highback with integrated headrest
- Uses original mounting hardware and bolts from factory seats
- 1997-2002 Wrangler TJ needs seat adapters 13201.11 and 13201.12
- Part number RUG13401.37
SKU: RUG13401.37 -
Seats
Rugged Ridge Sport Seat (Gray) – 13405.09
- Reclining front Sport seat in gray textured vinyl
- Integrated headrest cut-outs for 3-point and 4-point harness belts
- 1997-2002 Wrangler TJ requires seat adapters 13201.11 and 13201.12
- Fits 1976-1986 CJ5 and CJ7, 1981-1985 Scrambler, 1987-1995 YJ and 1997-2002 TJ
- Part number RUG13405.09
SKU: RUG13405.09 -
Seat Mounting Bracket
Misch Big Boy Seat Bracket – JBBJK350P
- Misch 4×4 BigBoy passenger side seat bracket, part MSCJBBJK350P
- Adds 3 inches of leg room from the stock seat position
- No drilling required
- Fits 2011–2018 Jeep Wrangler JK 2-door trims
- Sold individually; driver side is part MSCJBBJK350D
SKU: MSCJBBJK350P -
-
-
Seat Belt
MasterCraft Safety Mastercraft Latch and Link Restraint System (Black) – 113204
- Black latch and link restraint with 5-point mount
- Integrated Latch Guard helps prevent accidental unlatching
- SFI 16.1 and 16.5 compliant; part number MCS113204
- Universal fit; not a factory replacement
SKU: MCS113204 -
Seats
MasterCraft Safety Baja RS Fixed Headrest, Desert Tan with Black Center & Brown Haze Side Panels, Recliner Lever Left – 504028
SeatsMasterCraft Safety Baja RS Fixed Headrest, Desert Tan with Black Center & Brown Haze Side Panels, Recliner Lever Left – 504028
- Reclining front suspension seat, part number MCS504028
- Universal Fit, with no model years
- 9-position reclining mechanism with a machined billet left recliner lever
- Desert Tan with Black center and Brown Haze side panels
- Integrated belt slots and loops for five-point harnesses, plus optional comfort features
SKU: MCS504028 -
Seat Belt
MasterCraft Safety 5-Way Latch & Link Restraint (Black) – 111144
- Black 5-point latch and link restraint, SFI 16.1
- Pull-down lap belt 2 in x 55 in; dual shoulder harness 2 in x 48 in
- Bolt-in, snap-in or wrap-around ends; anti-submarine belt included
- Universal fit; not a factory replacement
SKU: MCS111144 -
Types of seats you will find
This category covers both front and rear seating, and the use case differs for each.
- **Front bucket and recliner seats.** Replacement factory-style seats, or sport and racing-style seats with higher bolsters for support on side slopes and washboard roads.
- **Suspension seats.** Designs such as a Baja-style seat add a pivoting or sprung base to absorb impacts, popular in desert and high-speed use.
- **Rear bench seats.** Fixed, low-back or high-back benches that restore seating in vehicles where the rear seat was removed.
- **Fold-and-tumble rear seats.** The back folds and the seat tips forward to free cargo space or give access behind the front seats.
Choosing a seat
- **Comfort and support.** Sit in a similar seat if you can. Tall drivers and those with a larger frame should compare listed dimensions such as width, depth and height.
- **Material.** Vinyl and denim shed water, mud and spills. Leather looks good but can be warm in summer. Some seats are made with water-resistant fabrics for open vehicles.
- **Adjustability.** Recliners and sliders help drivers with different heights share a vehicle.
- **Weight.** Lightweight racing seats cut weight but give up some padding and convenience.
- **Safety equipment.** If you want a harness, confirm the seat is designed for it, and use brackets and belts rated for the application.
Fitment and installation
Seat mounting differs widely between vehicles. Some seats are vehicle specific, while universal-fit seats need an adapter or bracket set to bolt to your floor. See the Seat Mounting Bracket and Seat Adapter subcategories for those parts. Confirm fitment for your exact year, make and model before ordering.
Seat mounting hardware is safety-critical. Use the grade of bolts and spacer hardware the manufacturer specifies, torque to the listed values, and make sure the mounting points are on solid floor structure. In a crash, seat and belt anchors carry large loads, so have a professional install the seat if you are unsure about drilling or modifying the floor. Do not put aftermarket seats in a vehicle with side airbags in the factory seat without understanding how that affects the safety system.
Check that wiring for seat belt sensors or heaters is handled properly, and check that the seat does not block the factory belt reach or restrict pedal movement.
Measure the available space before choosing a seat. Check the floor width between the door sill and the console or tunnel, the distance from the pedals to the seat back, and headroom with a roll bar or soft top in place. Seat width listed for a bucket should fit between the mounting points without touching the door or console.
Other items often used with seats include seat belts and belt pads, brackets and adapters, and headrests, all of which have their own subcategories. Common mistakes include reusing worn belts, using bolts of the wrong grade, and leaving the seat loose enough to shift under braking. Inspect the slider latches, mounting bolts and fabric regularly. Vinyl and denim can be cleaned with mild soap, and drying a wet seat after water crossings helps prevent mildew and odors.
Popular Seats brands
- Corbeau (86)
- Bestop (46)
- Smittybilt (43)
- Rugged Ridge (32)
- MasterCraft Safety (10)
- Bartact (2)
- Misch 4x4 (1)
- TeraFlex (1)
- Rampage (1)
Seats FAQ
Do universal seats need brackets?
Often yes. A universal seat has a standard mounting pattern, but the floor of your vehicle is different, so you typically need vehicle-specific brackets or an adapter. Check the listed fitment and the Seat Mounting Bracket subcategory.
What is a fold-and-tumble rear seat?
It is a rear seat whose back folds down and whose cushion tips forward. This frees up cargo space or lets passengers reach the area behind the front seats, and is common on two-door Jeeps and similar vehicles.
Can I put aftermarket seats in a vehicle with airbags?
Be careful. Some factory seats contain side airbags or sensors, and replacing them can disable or change the safety system. Read the manufacturer's notes, check how the vehicle is equipped, and consider professional advice before swapping.
Are racing seats comfortable for daily driving?
Racing seats have firm, deep bolsters that hold you in place off-road. Some drivers find them tight or hard on long commutes. Look at width and padding details, and consider a seat with more cushioning if you drive on the street daily.



















