Steel Accessories gathers small exterior hardware for Jeeps and trucks, including hood hinges and latches, hood locks, windshield brackets and tie-down kits, tail light guards, door handle covers and liftgate struts. Rugged Ridge, Fab Fours, Kentrol, DV8 Offroad and factory Jeep parts appear here. Check each product page for part numbers and fitment, then compare the products below.
Steel Accessories
Showing 1–12 of 48 resultsSorted by popularity
Shop Steel Accessories by type
-
Steel Accessories
Smittybilt Hood Catches (Stainless Steel) – 74335
- Hood catches for 2007–2018 Jeep Wrangler JK, two-door and four-door models
- Cast 304 marine grade stainless steel with a mirror finish
- Non-locking type, supplied as a pair
- Easy to install with no drilling or modification
SKU: S/B74335 -
-
Door Handle Cover/Inserts
Rugged Ridge Elite Door Handle Inserts (Brushed Tread) – 13311.51
- Fits 2007–2018 Jeep Wrangler JK Unlimited 4-door and 2-door trims
- Rugged Ridge Elite part number 13311.51, brushed tread inserts
- Lustrous brushed finish on lightweight cast aluminum
- Set of 5 for all doors and the rear tailgate
- Double-sided automotive tape installation
SKU: RUG13311.51 -
Door Handle Cover/Inserts
Rugged Ridge Door Handle Inserts (Brushed Aluminum) – 13311.53
- Fits 2007–2018 Jeep Wrangler JK Unlimited 4-door and select 2-door trims
- Rugged Ridge part number 13311.53, brushed finish with black contrast tread
- Set of 5 for all doors and the rear tailgate
- Lightweight cast aluminum
- Double-sided automotive tape installation
SKU: RUG13311.53 -
Door Handle Cover/Inserts
Rugged Ridge Door Handle Inserts – 13311.52
- Fits 2007–2018 Jeep Wrangler JK 2-door trims such as Rubicon, Sahara and Sport
- Rugged Ridge part number 13311.52, black contrast tread inserts
- Lustrous brushed finish with black recesses
- Set of 3 for both doors and the rear tailgate
- Double-sided automotive tape installation
SKU: RUG13311.52 -
Door Handle Cover/Inserts
Rugged Ridge Door Handle Inserts – 13311.50
- Fits 2007–2018 Jeep Wrangler (JK) 2-Door and Unlimited 4-Door models per the manufacturer fitment list
- Set of 3 cast aluminum door handle inserts for both doors and the rear tailgate
- Brushed finish with a tread-inspired inlay
- Mounts with double-sided automotive tape
SKU: RUG13311.50 -
Door Handle Cover/Inserts
Rugged Ridge Door Handle Inserts – 13311.49
- Fits 2007–2018 Jeep Wrangler JK Unlimited four-door, plus 2-door trims
- Rugged Ridge part number 13311.49, black tread door handle inserts
- Lightweight cast aluminum with a textured powder coat
- Set of 5 for all doors and the rear tailgate
- Double-sided automotive tape installation
SKU: RUG13311.49 -
Door Handle Cover/Inserts
Rugged Ridge Door Handle Inserts – 13311.48
- Fits 2007–2018 Jeep Wrangler JK 2-door trims
- Rugged Ridge part number 13311.48, black tread door handle inserts
- Lightweight cast aluminum with a textured powder coat
- Double-sided automotive tape installation
- Set of 3 for both doors and the rear tailgate
SKU: RUG13311.48
What is in this category
This grouping covers the smaller steel and stainless hardware around the body of an off-road vehicle. Subcategories include hood hinges, hood latch assemblies, hood locks, windshield brackets, windshield tie-down-cargo-management kits, tail light guards, door handle covers and liftgate lift supports.
Many items are replacements for worn or rusted factory parts, and others are upgrades for trail use or security.
Common product types
- Hood latches and locks hold the hood securely, and locks add theft deterrence for the engine bay.
- Hood hinges and pin grommets replace worn or corroded parts.
- Windshield tie-down-cargo-management kits secure a folding windshield on vehicles designed for it.
- Tail light guards and rear Euroguards protect lenses from rocks and bumps.
- Liftgate struts hold the rear door open and replace tired gas supports.
Choosing and checking fitment
These parts are usually vehicle-specific. Hinges, brackets and guards change with model year and body style, so confirm fitment for your exact year, make and model. Check whether the item replaces an original part or adds to it, and whether the finish is raw, powder coated, black or stainless.
For struts, compare extended and compressed length and the force rating, since the wrong strut may fail to hold the door or may be too strong. Stainless hardware resists corrosion better than bare steel.
Installation notes
Most pieces use ordinary hand tools. Support the hood or liftgate before removing hinges or struts, as springs and gas supports store energy and can cause injury if released suddenly. Use thread locker where recommended and tighten fasteners to the specified torque.
Lock cylinders and latches should be tested several times with the hood open before you close it, to avoid being unable to release a stuck latch. Apply grease to moving parts and check for alignment so the hood closes without stress.
Further checks and care
Questions to ask before you choose
Write down the model year and body style of the vehicle and, if possible, take photos of the existing part. Ask whether the replacement matches the original in finish and mounting. For security parts, think about whether you need key convenience, and for protection parts such as tail light guards, look at material thickness. Small details like thread size and bracket orientation often make the difference between a smooth swap and a frustrating one.
Materials and construction
Steel accessories are often made from cold-rolled steel with powder coat, or from stainless steel for corrosion resistance. Check the thickness, the finish and the quality of any welds. Hood locks and latches combine steel with springs and pins, so look for smooth operation. Liftgate struts use a pressurized cylinder, and cheap ones can lose pressure quickly. Products that mimic factory parts should match mounting points exactly to avoid fitment problems.
Inspection and maintenance
Check hood hinges and latches for rust, cracks and sloppy movement, and lubricate them lightly twice a year. Look at tail light guards for loose mounting and scratches that expose bare metal. Replace rubber grommets and cushions when they harden. Liftgate struts that no longer hold the door open should be replaced before they let it fall unexpectedly. Keep spare hardware, since small fasteners can be lost on the trail.
Popular Steel Accessories brands
- Rugged Ridge (11)
- Smittybilt (5)
- Fab Fours (5)
- Rampage (4)
- Kentrol (4)
- Jeep (3)
- Drake (2)
- RT Off-Road (2)
- Poison Spyder Customs (2)
- Dee-Zee (2)
- DV8 Offroad (2)
- Body Armor 4x4 (2)
Steel Accessories FAQ
How do I know if my liftgate strut is worn?
Common signs include a door that slowly sinks, will not stay open, or needs help to rise. Replace struts in pairs when both are weak, using the correct specification for your vehicle.
Are hood locks worth installing?
They can deter casual tampering with the engine bay and battery. Some are aftermarket add-ons that need careful installation, so check that they work with the factory latch and release, and keep the key accessible.
Do windshield tie-downs fit all vehicles?
No. They are designed for models with folding windshields and specific hinge or bracket styles. Confirm the listing matches your year, make and model. Check the product notes first.















