Select your vehicle

Showing 25–26 of 26 resultsSorted by popularity

Know your transmission first

Nothing in this category is chosen by vehicle alone. The same Jeep or Ram could have left the factory with two or three different automatics, and a filter for a 45RFE will not fit a 42RE in the same year of Grand Cherokee. Find the transmission code on the pan shape, the case casting, the build tag or the glovebox code sheet, and work from it. Common names here are the Chrysler 45RFE and 68RFE, the Dodge 47RE and 48RE behind diesels, and the GM 4L60E, 700R4, TH350 and TH400 families.

Service parts: filters, pans and dipsticks

A filter and gasket kit is the heart of a fluid service, and it should be done at the interval in the owner's manual, sooner for towing and off-road use where the fluid runs hot. Deep transmission pans, such as the BD Diesel cast aluminum pan for the 68RFE with cooling fins, a magnetic drain plug and a temperature sender port, add fluid capacity and shed heat, which is the single best thing you can do for an automatic that tows. Note that a deeper pan may need a longer filter or filter extension and hangs lower under the truck. Factory style dipsticks replace broken or missing tubes; make sure the tube length and mount match your bellhousing.

Torque converters

A torque converter's stall speed is the engine rpm at which it stops slipping and starts transferring full torque. Higher stall, like the B&M Holeshot units at 2,900 to 3,500 rpm, lets a modified gas engine launch harder and suits a light vehicle with a camshaft that makes power higher up. For a diesel truck that tows, the opposite is wanted: a converter with a tighter stall, a billet stator and more lock-up clutch material, like the BD Diesel performance converter, so heat stays down and lock-up holds under boost. A converter also has to match the crank pilot diameter and the flexplate bolt pattern; the 1.71 inch crank pilot listed on the B&M units is one of those details.

Shift kits and valve bodies

  • A shift kit, such as the B&M TranspakShift for the 1993 to 2001 4L60E, recalibrates the valve body for firmer, quicker shifts and less clutch slip, often with a choice of programs from mild to firm. It installs with the pan off and the transmission in the truck.
  • A performance valve body, like the BD Diesel exchange unit for 2003 to 2007 Ram 2500 and 3500, replaces the whole valve body with revised passages, new springs and larger ports for a diesel that tows or has more power. Some functions, such as second gear lock-up, require the maker's controller.
  • Shift bracket and lever kits adapt a cable shifter to GM transmissions when swapping a transmission or converting to an aftermarket shifter.

Flexplates

The flexplate bolts the converter to the crankshaft. On high output diesels the stock stamped plate can crack or shear its bolts, which is why BD Diesel sells a forged billet plate. Match the tooth count for the starter, the bolt pattern and the converter pad spacing, and use new bolts with thread locker at the factory torque.

Installation and fluid

Use the exact fluid specified for the transmission; many modern units are damaged by the wrong type, and ATF+4, Dexron VI and the various Mercon fluids are not interchangeable. Fill through the dipstick or the fill plug per the procedure, which on some units requires checking at a set temperature with the engine running. Torque pan bolts in a pattern and do not over-tighten, which distorts the rail and leaks. Converter and valve body work is for an experienced installer; a converter must be seated fully on the pump before the transmission is bolted up or the pump is destroyed on the first start.

Popular Automatic Transmissions brands

Shop Automatic Transmissions by type

Automatic Transmissions FAQ

How do I identify my automatic transmission model?

Check the pan shape against a chart, the casting numbers on the case, the build tag on the side of the transmission or the vehicle's code sheet in the glovebox or on the door jamb. Filters, converters and shift kits are all matched to the transmission model, not the vehicle.

What stall speed torque converter should I choose?

A higher stall, around 2,900 to 3,500 rpm, suits a modified gas engine that makes power higher up and wants a hard launch. A diesel that tows wants a tighter converter with a strong lock-up clutch to keep heat down. Match the crank pilot and bolt pattern too.

Is a deep transmission pan worth it?

For towing and off-road use, yes. Extra fluid and cooling fins lower operating temperature, which is what wears out an automatic. Check whether a longer filter is needed, watch the reduced ground clearance, and use the pan's magnetic drain plug at every service.

Can I install a shift kit without removing the transmission?

Most shift kits, including the B&M TranspakShift for the 4L60E, install with the pan and filter off while the transmission stays in the truck. A full valve body swap is also done in place. Follow the instructions for the program you want and refill with the correct fluid.