Overview
The Icon Suspension Uniball Upper Control Arm Kit, part number 78500, is a tubular upper control arm kit for 2011 to 2015 Chevy and GM 2500/3500HD trucks, in both 2WD and 4WD models. ICON Vehicle Dynamics designed it as a 100% bolt-on upgrade for the newest 2500HD and 3500 Chevy/GMC platform, aimed at everyday driving as well as off-road travel.
The kit pairs a tubular uniball upper control arm with a custom valved shock package, sold as part of the ICON 2.5 performance lift upgrade. Factory ball joints can restrict suspension travel, especially when the truck runs 2.5 VS Series performance coil-over shocks. The upgrade offers nearly 50% more wheel travel than the factory GM setup, with improved ride quality and vehicle control on and off road.
Key features
- Tubular uniball upper control arm design
- PTFE lined uniballs meant to avoid factory ball joint bind
- 17-4 stainless taper pin adapters that ICON says let the upper arm misalign for smooth wheel travel
- 4130 CNC machined uniball cup
- 1026 DOM seamless tubing, CNC bent
- Custom valved shock package in the ICON 2.5 upgrade
- ICON states nearly 50% more wheel travel than the factory GM setup
Upper arm geometry and travel
Upper control arms locate the top of the wheel and set the camber and caster angles that keep the tires square to the road. Tubular arms are a common upgrade because they resist flex better than stamped arms, which helps them hold position under hard braking and off-road loads. Ball joints and their bushings carry the pivoting load, so their condition matters as much as the arm itself.
When the suspension is raised or fitted with longer coil-over shocks, the arm angles change and the joints may reach their travel limits sooner. Plan for an alignment after the work, and recheck the bolts and joint clamps after the first few trail runs. Inspect the joints for play and torn boots at regular service intervals, since worn joints show up as wandering on the highway and uneven tire wear.
Specifications
| Brand | Icon Suspension (ICON Vehicle Dynamics) |
|---|---|
| Part number | 78500 |
| UPC | 70000635952 |
| Tubing | 1026 DOM seamless tubing, CNC bent |
| Uniball cup | 4130 CNC machined |
| Taper pin adapters | 17-4 stainless |
| Uniballs | PTFE lined |
| Position | Front and rear, upper tube |
| Drivetrain | 2WD and 4WD models |
| Vehicle years | 2011 to 2015 |
Vehicle fitment
It fits 2011 to 2015 Chevy and GM 2500/3500HD trucks, in 2WD and 4WD models. Confirm fit for your vehicle’s year, model and trim before ordering.
Light-duty 1500 trucks and model years outside 2011 to 2015 are not covered by the stated fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs as a bolt-on upgrade. Replacing the upper control arms and adding coil-over shocks changes suspension geometry, so have the front end aligned after installation and check driveline angles on lifted trucks.
What’s included
The kit includes tubular uniball upper control arms, 4130 CNC machined uniball cups and 17-4 stainless taper pin adapters. Check the package contents against your installation before starting.
Not included: The 2.5 VS Series coil-over shocks are the units this upgrade is used with. Check the package contents before ordering to see whether shocks are included.