Overview
TRX563801 is the TruXedo Lo Pro QT, a soft roll-up tonneau cover built for a low profile and easy removal. It is made for the 2007–2021 Toyota Tundra in several trims, from Base to TRD Pro.
The cover suits owners who move oversized cargo or ATVs and want the bed clear when needed. Its angled side rails sit less than 1 inch above the truck bed, and the aerodynamic styling can improve gas mileage. Putting the cover back on after removal takes about 5 minutes.
Once installed, the cover opens from fully closed to fully open in 20 seconds, giving full access to the bed. Corner seals and a weather seal on all four sides help keep the elements out.
Key features
- Low, angled side rails less than 1 inch above the truck bed
- Removal and re-installation designed for oversized cargo and ATVs
- Velcro brand loop measuring 1 inch wide with a floating hook
- Tension control system that keeps the closed cover tight
- Corner seals and weather seal on all four sides
- Works with most accessories, including bed rails, bed liners and rail caps
Getting the most from the cover
A cover you remove often needs a routine. Each time it comes off, inspect the fabric for abrasion where it rubs the rails, and look at the seals for flattening or tears. Storing the cover clean and dry keeps the material flexible, which makes the next install quicker.
Tundra beds are used for different jobs, so think about what will sit in the bed before deciding how often to remove the cover. Items with sharp edges should be secured away from the fabric, and loads that shift can press on the rails. A little planning keeps the cover and the cargo in good condition.
- Inspect the fabric where it rubs the rails
- Store the cover clean and dry between uses
- Secure sharp-edged cargo away from the fabric
Specifications
| Brand | TruXedo |
|---|---|
| Part number | TRX563801 |
| Material | Soft |
| Tonneau type | Roll-up |
| Operation | Manual |
| Side rail height | Less than 1 inch above the truck bed |
| Velcro loop width | 1 inch |
| Closed to open time | 20 seconds |
| Reinstall time | About 5 minutes |
| Rack compatible | No |
| Toolbox compatible | No |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims. Model years after 2021 and other Toyota models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Re-installation takes about 5 minutes, and the Velcro fastening runs the full length of the bed rail.
What’s included
Check the package contents against your installation before starting.
Not included: Rack or toolbox accessories, since the cover is not compatible with either.
