Select your vehicle

TruXedo Lo Pro QT Soft Roll Up Tonneau Cover – 546801

TruXedo

Shop Toyota Tundra Tonneau Covers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2007–2021 Toyota Tundra in the listed trims
  • Low-profile soft roll-up cover, less than 1 inch above the bed
  • Opens fully in 20 seconds; about 5 minutes to re-install
  • Part number TRX546801; not rack or toolbox compatible

Description

Overview

The TruXedo Lo Pro QT soft roll-up tonneau cover, part number TRX546801, is a low-profile soft cover for the 2007–2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims. Its angled side rails sit less than 1 inch above the truck bed.

The Lo Pro QT is designed for easy removal and re-installation, which suits owners hauling oversized cargo or ATVs. Re-installation takes about 5 minutes, and the cover moves from fully closed to fully open in 20 seconds. A tension control system keeps the cover tight when it is closed, and the angled side rails give the truck a lower-profile look.

Fastening uses a Velcro brand loop 1 inch wide along the bed rail, paired with a floating hook that moves on the rail, with no snaps or adhesives. Exclusive corner seals and a weather seal on all four sides help keep the elements out, and TruXedo claims more seals than competing covers. Bed rails, bed liners and rail caps can be used with the cover.

Key features

  • Low-profile soft roll-up design, less than 1 inch above the bed
  • Angled side rails for a sleek look
  • Easy removal and re-installation
  • Opens fully in 20 seconds
  • Velcro brand loop 1 inch wide with a floating hook
  • Tension control system keeps the cover tight when closed
  • Weather seals on all four sides and exclusive corner seals
  • Works with bed rails, bed liners and rail caps

Fastening and fit details

Fastening relies on the Velcro brand loop along the bed rail and a floating hook that moves along the rail, so the fabric seats without snaps or adhesives. Take care to press the loop firmly and evenly along the full rail, since a short run leaves that section less secure in wind.

The weather seals on all four sides and the corner seals keep dust and rain out when the cover is closed. Inspect the seals and the loop after washing the truck, and replace any section where the hook no longer grips firmly. Bed liners and rail caps can sit alongside the cover, but check that they do not interfere with the rail or the fabric path.

  • Check the hook movement along the rail
  • Clean the Velcro loop of debris
  • Inspect the corner seals after washing

Specifications

Brand TruXedo
Part number TRX546801
Product line Lo Pro QT
Tonneau type Roll-up (soft)
Material Soft
Side rail height Less than 1 inch above the truck bed
Velcro loop width 1 inch
Open time 20 seconds, fully closed to fully open
Re-installation time About 5 minutes
Operation Manual
Fitment type Direct fit
Rack compatible No
Toolbox compatible No

Vehicle fitment

The cover fits the 2007–2021 Toyota Tundra in the 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro and Trail trims. Model years outside 2007–2021 and other Toyota models do not fit.

Other Toyota trucks and model years are not covered here. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Removal and re-installation are part of the design, and re-installation takes about 5 minutes. The Velcro brand loop runs along the bed rail, so it should be fitted along the full length of the rail.

What’s included

This part number is the Lo Pro QT soft roll-up tonneau cover. It is not toolbox compatible and not rack compatible.

SKU: TRX546801 Categories: ,

Fitment

VehicleYearsTrims
Toyota Tundra2007–20211794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro, Trail

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TruXedo Lo Pro QT fit my Toyota Tundra?

Yes, if your truck is a 2007–2021 Toyota Tundra in one of the listed trims: 1794 Edition, Base, Limited, Nightshade, Platinum, SR, SR5, TRD Pro or Trail. Other model years and other Toyota trucks are not covered, so confirm your year and trim before ordering.

Can this cover be removed and put back on?

Yes. The Lo Pro QT is designed for easy removal and re-installation, and re-installation takes about 5 minutes. That makes it practical for clearing the bed for oversized cargo or ATVs and putting the cover back on afterward.

How fast does the cover open?

The cover moves from fully closed to fully open in 20 seconds, giving complete access to the truck bed. Its side rails sit less than 1 inch above the bed when closed, so the profile stays low.

Does it work with a rack or toolbox?

No. The cover is not rack compatible and not toolbox compatible. Bed rails, bed liners and rail caps are the accessories that work with it, so check those before adding other gear.

How do I keep the Velcro loop gripping well?

Keep the loop clean and free of dust and grit, which can weaken its hold. Press the hook firmly along the full length of the rail after cleaning, and check the grip before each long drive with the cover in place.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tundra Tonneau Covers on Amazon