Overview
The Rough Country 23146_F is a front N3 monotube shock sold as a pair. It covers a 5 to 6.5 inch lift range, with a stud top mount, a bar pin bottom mount, gas charged construction and a direct fit for the front position. The extended length is 26.06 inches and the collapsed length is 15.32 inches.
Cherokee XJ and Wrangler TJ vehicles with a 5 to 6.5 inch lift use this front shock, and each side of the vehicle takes one shock from the pair.
The shock uses 10-stage variable valving and is high pressure nitrogen charged. It has a 35mm piston and an 18mm chromed hardened, spring loaded piston rod. The 54mm body dissipates heat faster, and the shock is rated to 36kN tensile strength with military spec fluid rated to 40 degrees C.
Rubber bushings absorb vibration, and the shock is finished in metallic silver paint. It carries a 3-year warranty.
Key features
- 10-stage variable valving
- High pressure nitrogen charge
- 35mm piston and 18mm chromed hardened rod
- 54mm shock body
- Spring loaded piston rod seal
- Rubber bushings and metallic silver paint
Matching lift and valving
Shock valving controls how quickly the damper resists movement, so a shock matched to the lift height helps the truck ride and control the axle. 10-stage valving gives more adjustment points than simple valving, which can help a truck that sees both highway and trail use. A shock sized for a 5 to 6.5 inch lift can be too long or too short for a different lift, so check the lift before choosing.
Replace the shock pair before the bushings and brackets wear, and replace both fronts together so they damp alike. Inspect the rubber bushings and the bar pin mount during routine service, and look for cracks or looseness. A worn bushing lets the shock move at the mount and can change steering feel on rough roads.
- Replace front shocks in pairs
- Inspect bushings at each oil change
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 23146_F |
| Shock series | N3 Performance |
| Shock type | Monotube |
| Lift range | 5 to 6.5 inches |
| Extended length | 26.06 inches |
| Collapsed length | 15.32 inches |
| Top mount | Stud |
| Bottom mount | Bar pin |
| Body | 54mm |
| Piston | 35mm |
| Rod | 18mm chromed hardened |
| Tensile strength | 36kN |
| Warranty | 3-year warranty |
| Sold | As a pair |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee XJ in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the 1997 to 2006 Jeep Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
The JK and later Wrangler models are not covered, and the LJ is not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The shocks are sold as a pair. Check the bushings and hardware against your installation before starting.









