Overview
The Trail Gear Driveline Spacer Kit, part 300733-1-KIT, is a driveline spacer kit for the 2005-2013 Toyota Tacoma. It fits either the front or the rear driveshaft.
Each kit contains one spacer and mounting hardware. The spacers are made from 6061 T6 aluminum, and this kit includes longer M10 mounting bolts than the standard hardware.
Confirm the spacer length and the lift height it suits before ordering.
Key features
- Fits front or rear shaft
- Spacer made from 6061 T6 aluminum
- Includes longer M10 mounting bolts
- One spacer and mounting hardware per kit
Before you buy
A driveline spacer adds length between two driveline parts, which helps keep shaft angles workable after a lift. Tacomas often need a spacer on the front or rear shaft depending on the lift and the transfer case position, so think about which joint carries the most angle.
Longer bolts change how the spacer clamps, so use only the hardware that comes with the kit and check that the threads engage fully. After installation, look for vibration, check the joints for play, and inspect the spacer after rough trail use. Keeping a record of the shaft angles before and after helps you judge whether the spacer is doing its job.
- Measure shaft angles before choosing the spacer
- Use only the hardware supplied with the kit
- Check U-joints and slip yokes for wear
- Recheck bolts after the first trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 300733-1-KIT |
| Position | Front or rear shaft |
| Material | 6061 T6 aluminum |
| Mounting bolts | Longer M10 bolts |
| Contents | One spacer and mounting hardware |
Vehicle fitment
It fits the 2005-2013 Toyota Tacoma, including Base, Pre Runner and X-Runner models.
It does not fit Tacoma generations before 2005 or after 2013. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
One driveline spacer, mounting hardware and the longer M10 mounting bolts.
