Overview
The TeraFlex Renegade 1.5 Inch Budget Boost Lift Kit, part number 1351200, is a 1.5 inch spacer lift kit for the 2015–2021 Jeep Renegade (BU) and the 2017–2018 Jeep Compass.
The offset front IFS strut spacers account for the mounting angle of the factory struts, which keeps camber and caster in line up front. At the rear, strut spacers and angled rear lower control arm spacers correct camber so alignment stays within factory specifications. The kit keeps correct wheel offset, includes front sway bar quick disconnects, and uses spacers with no new shocks.
Key features
- 1.5 inch lift using spacers
- Offset front IFS strut spacers account for the factory strut mounting angle
- Rear strut spacers and angled rear lower control arm spacers correct rear camber
- Maintains correct wheel offset
- Includes front sway bar quick disconnects
- Listed lift height range of 0-3.5 inches
- No shocks included
Before and after a spacer lift
A spacer lift raises the body without changing shock travel, so the suspension can run closer to its limits at full droop. Before installing, check that the existing shocks have enough length for the new ride height. Brake hoses, wiring and the CV axle angle should be checked through the full range of travel, since a raised ride height can stretch or pinch them.
After installation, the alignment should be checked and the fasteners should be re-checked after the first few miles of driving. Tire clearance at full steering lock and at full compression is worth confirming, and the bump stops should be inspected for proper contact with the new ride height.
- Check shock length against the new ride height
- Inspect brake hoses and wiring for stretch
- Re-check fasteners after the first drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1351200 (also shown as TER1351200) |
| Product type | Spacer lift kit (complete lift kit) |
| Lift height | 1.5 inches |
| Lift height range | 0-3.5 inches (as listed) |
| Rear lift component | Spacer |
| Shocks | None |
| Front shocks | None |
| Rear shocks | None |
| Sway bar | Front sway bar quick disconnects included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the TeraFlex 1351200 covers these vehicles: 2017–2018 Jeep Compass (Latitude, Limited, Sport, Trailhawk); 2015–2021 Jeep Renegade (Latitude, Limited, Sport, Trailhawk).
It covers 2017–2018 Jeep Compass and 2015–2021 Jeep Renegade models in Latitude, Limited, Sport and Trailhawk trims. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Suspension work affects handling and braking, so professional installation is the safer choice. Use the correct torque value for each fastener during installation.
- Have the alignment checked after any suspension work.
- Check tire clearance and brake hose and wiring length through the full range of travel.
- Re-check fasteners after the first miles of driving.
- Check your local regulations on suspension height changes.
- Have the alignment checked after installation, as the kit is designed to keep camber and caster within factory specifications.
What’s included
- Offset front IFS strut spacers
- Rear strut spacers
- Angled rear lower control arm spacers
- Front sway bar quick disconnects
Not included: Shocks are not included.
