Overview
The Fabtech FTS21184 is a 4-inch lift system with Stealth monotube shocks for the 2011–2015 Chevrolet Silverado 2500 HD and 3500 HD and the 2011–2015 GMC Sierra 2500 HD and 3500 HD. The front keeps the factory coilover shocks on a steel spacer system, and the rear uses a 1 1/2-inch lift block with U-bolts.
The stock upper control arms are replaced with tubular Uniball arms made from 0.120 wall 4130 chromoly, with a 1.50-inch OD and 1-inch FK stainless PTFE Uniballs. The front differential is relocated to keep CV angles proper at the new height, and a 1/4-inch thick steel skid plate guards the front. This kit is made for factory aluminum suspension vehicles, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 4-inch lift height
- Tubular Uniball upper control arms
- Factory coilover shocks kept on a steel spacer system
- Front differential relocated
- 1/4-inch steel skid plate
- Rear performance shock absorbers
Choosing the right setup
Factory suspension type matters with this kit. Aluminum front suspension and steel front suspension are different builds, so confirm which one your truck has before buying parts. A coilover spacer system keeps the factory shock and spring assembly in place, which keeps the front end closer to the original setup than a full coilover conversion would.
Shock mounts and shock bodies see new angles after a lift, so keep them clean and check for leaks during the first few weeks of driving. A rear lift block shifts the axle position, which makes U-bolt torque worth rechecking early. Because the front differential moves, driveline angles deserve a look once the kit is installed and the truck has settled.
- Check U-bolt torque after the first few drives
- Look over the coilover spacers for wear
- Inspect the CV boots for stretch at the new height
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21184 |
| UPC | 674866091078 |
| Lift height | 4 inches (range 3 to 4.99 inches) |
| Suspension type | Lift spindle |
| Upper control arm tubing | 0.120 wall 4130 chromoly, 1.50-inch OD |
| Uniballs | 1-inch FK stainless PTFE |
| Skid plate | 1/4-inch thick steel |
| Rear lift | 1 1/2-inch lift block and U-bolts |
| Shocks | Stealth monotube shocks; performance rear shock absorbers |
| Tire and wheel fit | 33/12.50R17 on 17×8, 275/65R18 on 18×8, 295/55R20 on 20×9 |
Vehicle fitment
It is offered for the 2011–2015 Chevrolet Silverado 2500 HD and 3500 HD and the 2011–2015 GMC Sierra 2500 HD and 3500 HD.
The system only fits factory aluminum suspension vehicles. It is not for models with Factory AutoRide shocks, all-wheel drive models or standard cab trucks. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Check whether the factory front suspension is the aluminum or steel version before fitting, since this kit is built for the aluminum type. The OEM wheel and tire cannot be used with this kit.
What’s included
Tubular Uniball upper control arms, the front coilover spacer system, the front differential relocation parts, the 1/4-inch steel skid plate, the 1 1/2-inch rear lift block with U-bolts and Stealth monotube shocks.









