Overview
The Pro Comp K6006MS is a 6-inch stage 1 suspension lift with PRO-M front and rear shocks for the Nissan Titan. It fits the 2004–2015 and 2017–2021 model years, and the lift height range is 6 to 7 inches.
The rear uses a block and spacer design with block and U-bolt components. The tire size is 35 inches. The kit raises the height and levels the stance of these trucks.
Key features
- 6-inch stage 1 lift for the Nissan Titan
- PRO-M front and rear shocks, included
- Block and U-bolt rear lift components
- Lift height range of 6 to 7 inches
- Tire size of 35 inches
Driveline and ride height
A block and U-bolt rear lift raises the axle relative to the frame, which changes the pinion angle and the driveline angle. On a truck used for towing or daily hauling, that angle matters more than the height itself. Pinion angle can be checked with an angle gauge at the axle yoke, and some owners add a pinion correction or a different driveshaft when the change is large.
Front and rear lift parts should be chosen together, so the ride height does not end up uneven. Shock length, brake hose reach and sensor wires all depend on the new height. Keep part numbers for the block set, since replacement pieces are often needed after years of heat cycling.
- Measure pinion angle before and after the install
- Check brake hose reach at full droop
- Inspect U-bolts and nuts at each service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K6006MS |
| Suspension type | Lift kit, 6-inch stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-M |
| Rear shocks | PRO-M, included |
| Rear lift method | Block/spacer with block and U-bolt |
| Tire size | 35 inches |
| Shocks included | Yes |
Vehicle fitment
It fits Nissan Titan trucks in the LE, PRO-4X, Platinum Reserve, S, SE, SL, SV and XE versions, covering 2004–2015 and 2017–2021.
There is no 2016 model year in the fit. Other Nissan trucks, including the Titan XD, are not covered. Match your truck’s year, model and trim to this fit before ordering.
Installation notes
On a Titan, the block and U-bolt rear lift and the front lift change the ride height and the driveline angles, so have the alignment checked after the kit is installed and confirm the driveline clearance at the new height.
What’s included
PRO-M front and rear shocks, the block and U-bolt rear lift components, and the rest of the lift hardware for this kit.






















