Overview
The PAPLS408 is a 5-inch premium lift system for 2005–2016 Nissan Frontier models with gasoline engines in 2WD and 4WD form. It combines a body lift with a leveling system, and it allows the use of up to a 33-inch diameter tire on the factory wheels.
The kit uses two billet aluminum spacers that sit on top of the strut mount plate and two urethane compression spacers that sit on the coil springs. Fiberglass reinforced nylon body blocks and a CNC machined steering extension complete the lift, and urethane Gap Guards cover the gaps between the body and frame. The kit is made in the U.S.A.
The bumper relocation brackets are 3/16-inch thick, laser cut and powder coated, and they are fitted at both the front and the rear.
Key features
- 5-inch lift without modifying existing suspension components
- Two billet aluminum coil spring spacers
- Two front urethane coil spring spacers
- Fiberglass reinforced nylon body blocks
- 3/16-inch bumper relocation brackets, front and rear
- Urethane Gap Guard wheel well extensions
Spacers and bracket maintenance
Billet aluminum and urethane spacers do different jobs in a combined lift, so both should be inspected separately. Billet spacers are rigid and keep the strut mount position consistent, while urethane spacers compress slightly and can flatten over time. Look for uneven wear, cracks and any shifting of the spacers that would change the alignment of the coil springs.
Body blocks and bumper relocation brackets carry the load of the lift, so their fasteners need periodic checks. Lift height changes on a Frontier also affect the front and rear drive angles, which can increase vibration if a component is out of position. After installation, drive at moderate speed and listen for rattles near the front brackets, then retighten as needed.
- Inspect billet spacers for cracks or loose hardware
- Check urethane spacers for flattening or shifting
- Watch for vibration that suggests a shifted bracket
Specifications
| Brand | Daystar |
|---|---|
| Part number | PAPLS408 |
| UPC | 618089008987 |
| Lift height | 5 inches |
| Maximum tire diameter | 33 inches |
| Drivetrain | 2WD and 4WD with gasoline engine |
| Spacers | Two billet aluminum, two urethane |
| Body blocks | Fiberglass reinforced nylon |
| Bumper brackets | 3/16-inch thick, laser cut, powder coated |
| Installation time | 10 to 12 hours |
| Made in | United States |
Vehicle fitment
It fits the 2005–2016 Nissan Frontier.
The list covers the Frontier only, with no other Nissan models. Model years before 2005 and after 2016 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The job takes 10 to 12 hours. The kit includes a CNC machined and zinc plated steering extension and extension brackets, so those parts go in along with the body blocks and bumper brackets.
What’s included
Two billet aluminum coil spring spacers, two urethane coil compression spacers, fiberglass reinforced nylon body blocks, front and rear bumper relocation brackets, a steering extension, extension brackets, urethane Gap Guards and high strength hardware.









