Overview
The TeraFlex 1853602 is a pair of 6 inch lift front coil springs for the 2007-2015 Jeep Wrangler JK. A coil spring supports the weight of the vehicle at each front wheel and sets the front ride height, so a taller spring raises the front of the Wrangler.
The JK Wrangler leaves the factory with front rake, with the front about 1.5 inch lower than the rear. These front coil springs are designed to remove that rake, so the front is lifted more than the rear to level the vehicle. Added equipment such as a winch, bumpers, racks and a larger spare tire is expected, and the suspension is designed to sit at or close to the stated lift height with those parts fitted.
Key features
- 6 inch lift front coil springs
- Front position
- Fits 4-door models.
- Designed to eliminate the factory front rake of about 1.5 inch
- Lift height is based on a vehicle carrying added aftermarket equipment
- TeraFlex also offers leveling spacers to adjust ride height
- Direct fit
Matching lift with other parts
Front coil springs change the height and the geometry of the front suspension at once, so the rest of the front end has to follow. A taller front spring increases the angle of the track bar, the driveshaft and the brake lines, which means their length and clearance need checking through full steering and suspension travel. Shocks may also need a different length to match the new ride height and keep the damping in its working range.
Many owners plan a complete setup rather than a single part. Consider the rear suspension, bump stops and sway bar links if the vehicle will carry a heavier load or larger tires, and check the rear height after the front is changed so the vehicle sits level. An alignment should follow any change in height, and the vehicle should be checked again after the first few drives.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1853602 (also shown as TER1853602) |
| UPC | 843885023913 |
| Product type | Lift coil springs |
| Lift height | 6 inch |
| Position | Front |
| Models | 4-door |
| Factory front rake addressed | About 1.5 inch |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the TeraFlex 1853602 includes:
- 2007–2015 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X)
The list covers the 2007-2015 Wrangler JK only. It does not include the 2016-2018 JK years, the JL, the TJ or the YJ. TeraFlex also says 2 door JKs will see about 1 inch of additional lift compared with 4 door JKs using the same lift springs, and that a vehicle may not match the specified lift height exactly. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping front coil springs means compressing and releasing a loaded spring near the steering and brake components, so most owners leave this to a professional shop. Keep the Wrangler on jack stands on a flat floor and tighten fasteners to the factory-style torque values given by the manufacturer.
A taller front end changes the angle of the track bar, brake lines and driveshafts, so check their clearance through full steering and suspension travel and book an alignment. Re-torque the hardware after the first drive, and confirm that the new height is legal where you live.
What’s included
- Front coil springs, 6 inch lift
Not included: Shocks, track bars, control arms, brake line parts and other lift components are not included.









