Overview
The TeraFlex 3 Inch Lift Coil Springs, part number 1854202, are rear coil springs for the 2007–2015 Jeep Wrangler JK. They provide 3 inch of lift on four-door models and 4 inch on two-door models, covering both body styles.
Factory front rake is the reason TeraFlex designed its front coil springs differently. The JK sits roughly 1.5 inch lower in front than in back from the factory. TeraFlex front springs aim to erase that rake, so a lift measured after installation shows more height at the front than the rear. These rear springs complete the setup.
Real-world lift shifts with added gear. TeraFlex says its JK suspensions are tuned to sit at or near the advertised height once winches, bumpers, racks and larger spare tires are fitted, so measured results can differ. TeraFlex also says two-door JKs gain roughly 1 inch more lift than four-door JKs using the same springs.
Key features
- Rear coil springs for two-door and four-door JK Wrangler models
- Lift of 3 inch on four-door models and 4 inch on two-door models
- Two-door JKs will gain about 1 inch more lift than four-door JKs
- Companion TeraFlex front coil springs are designed to eliminate factory front rake of about 1.5 inch
- TeraFlex offers leveling spacers for ride height tuning
- Part number 1854202 with UPC 843885023999
Setting ride height after installing
Factory front rake means the front of a JK sits lower than the rear, so rear springs alone do not set the overall stance. After installing rear springs, measure ride height at all four corners and compare the front and rear on level ground. Front springs or leveling spacers are often used to balance the two ends, and the result depends on how much gear is carried.
Rear lift changes the driveline angles and the rear suspension geometry, so a check after installation is worthwhile. Tire size, winches and bumpers all shift the final height, so measure again once those accessories are fitted. Recheck the alignment and the driveline after the first few drives.
- Measure all four corners on level ground
- Compare front and rear height before driving far
- Recheck driveline angles after installation
- Retest height after adding gear or larger tires
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1854202 |
| UPC | 843885023999 |
| Position | Rear |
| Body styles | Two-door and four-door |
| Lift height | 3 inch on four-door models; 4 inch on two-door models |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler (JK) in the 70th Anniversary, Rubicon, Sahara, Sport and X trims, including the Unlimited versions of those trims.
Wranglers outside the 2007–2015 JK range, all JL models, and earlier TJ, LJ and YJ Wranglers are outside this fitment. Verify that your year, model and trim match before buying.
Installation notes
Because factory front rake is involved, check ride height and alignment after installing these rear springs, and have driveline angles inspected on a lift this size.
What’s included
The product covers rear coil springs only, part number 1854202.
Not included: The package covers rear coil springs only, part number 1854202. Plan for shocks, brackets and hardware separately if they are needed for your build.









