Overview
The TeraFlex 1853202 is a pair of front coil springs for 2007–2015 Jeep Wrangler JK vehicles, delivering 3 inch of lift on 4-door Wranglers and 4 inch on 2-door Wranglers. The set is designed to offset the factory front rake, the built-in tilt that leaves a stock JK sitting roughly 1.5 inch lower at the front than at the rear.
Since the goal is a level stance rather than height alone, the front rises more than the rear once the springs are in, and that difference is intended. The written copy warns that aftermarket winches, bumpers, racks and a larger spare tire will all affect the finished height, so the stated figures serve as targets. A 2-door will read about 1 inch higher than a 4-door fitted with these same springs, so buyers should plan around their own measurements.
Key features
- Sold as a pair, giving two front springs per order
- 3 inch lift on 4-door models and 4 inch lift on 2-door models
- Designed to remove the factory front rake for a level result
- Direct fit for 2007–2015 Jeep Wrangler JK, including Unlimited versions
- Two-door bodies gain about 1 inch more than 4-door bodies on identical springs
- Front position, matching the front-axle lift the product describes
- The brand also offers leveling spacers for finer ride-height changes on JKs
- Part number 1853202 with UPC 843885023876 for matching
Front lift pairs and setup
Front springs sold as a pair are meant to be installed together, so the height and firmness stay matched from side to side. A pair also keeps the front end predictable under braking and on uneven ground. Fitting one side at a time tends to leave the vehicle sitting unevenly and can make the steering feel off.
Taking the front apart is also a chance to look at the bump stops and the upper control arm bushings. A taller stance can change how the bump stop engages, so inspecting them while the work is open is practical. Keeping the sway bar and steering components in good shape completes the setup.
- Replace both front springs together
- Bump stops checked for splits and wear
- Upper control arm bushings inspected
- Sway bar links checked before driving
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1853202 |
| UPC | 843885023876 |
| Position | Front |
| Quantity sold | As a pair |
| Body styles | 2-door and 4-door |
| Lift height, 4-door | 3 inch |
| Lift height, 2-door | 4 inch |
| Factory front rake addressed | About 1.5 inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler JK, including the 70th Anniversary, Rubicon, Sahara, Sport and X trims and their Unlimited versions. JK model years after 2015 and other Wrangler generations are outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the springs are sold as a pair, replace both fronts together so the lift stays even from side to side. Lift also changes alignment and driveline angles, so have the front end aligned and check the driveshaft after the work. Measure ride height on each side once the vehicle is back on its wheels, and keep in mind that aftermarket accessories will shift the reading.
What’s included
Two springs arrive per order because the set is sold as a pair. Check the package contents against your installation when it arrives, including any bolts or brackets.









