Overview
The TeraFlex 2.5-inch Lift Rear Coil Springs (part number 1862102) are black rear lift springs for the 2-door Jeep Wrangler JL. They have a height range of 2 to 3.5 inches and fit the 2018–2026 Rubicon, Sport and Sport S 2-door models.
The springs are tuned for balance between front and rear and side-to-side load. They are designed for daily driving and trail use, and the linear rate design keeps more coils active under load for consistent handling through the full suspension travel.
Key features
- Rear lift springs for the 2-door JL
- Balanced for front-to-rear and side-to-side load.
- Consistent handling through the full range of suspension travel
- Stated height range of 2 to 3.5 inches
- Linear rate design
- Tuned for balance between front and rear and side-to-side load
- Black finish
Pairing rear springs with shocks
Rear springs carry the load over the axle and help set rear ride height, so their rate and height affect how the vehicle handles on the road and on trails. Shock absorbers control how quickly the spring moves, so a change in spring height often calls for checking shock length and damping.
Rear lift springs also affect driveshaft angle, brake line length and the clearance around bump stops. Look at the rear bump stops and sway bar links after the change, since a higher rear can shift their position. Rubber bushings and mounts should be inspected for wear.
- Check shock length against the new height
- Inspect rear bump stops for clearance
- Look over brake lines after the lift
- Check bushings and mounts for wear
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1862102 |
| Position | Rear |
| Height range | 2 to 3.5 inches |
| Spring design | Linear rate |
| Color | Black |
| Fitment type | Direct fit |
Vehicle fitment
TeraFlex lists these springs for the 2018–2026 Jeep Wrangler (JL) 2-door Rubicon, Sport and Sport S models.
The 4-door JL and the Gladiator are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TeraFlex recommends pairing these springs with Falcon SP2 Mode Adjust shock absorbers, which the company says were engineered together with the springs to improve compression and rebound.
What’s included
Rear lift coil springs.









