Overview
The TeraFlex 3.5″ Lift Rear Coil Springs (part number 1873100) are black rear lift springs for the Jeep Gladiator JT. TeraFlex lists them for the 2020–2026 Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S models, and gives a height range of 2 to 3.5 inches.
The rear springs use a progressive triple-rate design. The softer upper section unwinds as the axle droops, which helps flex and spring retention, while the stiffer lower section adds stability when towing. The towing coils are lowered to improve ride quality when the truck is unloaded.
The progressive design keeps performance consistent during normal street driving, with handling close to that of a linear rate spring. The springs are built to work on the road, off road and while towing.
TeraFlex says these coil springs and its Falcon Performance SP2 Mode Adjust shock absorbers were engineered together to improve both compression and rebound, for stability when the vehicle is loaded or towing. Owners running other shock absorbers should check the match with that shock maker.
Key features
- 3.5-inch rear lift for the Gladiator
- Progressive triple-rate design
- Consistent, predictable handling on the street
- Softer upper coil for flex as the axle droops
- Stiffer lower coil for stability while towing
- Towing coils lowered for unladen ride quality
- Black finish
Choosing between rear spring rates
Rear springs come in linear and progressive designs, and the choice changes how the rear feels at light load and under heavy load. A progressive spring gives a softer start for flex and a firmer finish for towing, which suits a truck used both unloaded and loaded.
A rear lift changes the geometry of the axle and driveshaft, so check the driveshaft angle and brake line length after installation. Shock absorbers and springs are usually matched as a set, so compare their lengths and mounts before buying. Worn rear bushings and bump stops are commonly replaced at the same time.
- Match shocks to the spring design
- Check the driveshaft angle after the lift
- Inspect rear bump stops and bushings
- Re-check fasteners after the first drives
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1873100 |
| Position | Rear |
| Height range | 2 to 3.5 inches |
| Spring design | Progressive triple-rate |
| Color | Black |
| Fitment type | Direct fit |
Vehicle fitment
TeraFlex lists these rear springs for the 2020–2026 Jeep Gladiator (JT) Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S models.
The Wrangler JL and the front of the Gladiator are not covered by these rear springs. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
TeraFlex recommends pairing these springs with Falcon Performance SP2 Mode Adjust shocks, which the company says were engineered together with the springs to improve compression and rebound.
What’s included
Rear lift coil springs.









