Overview
The TeraFlex 1151421 is a 4 inch basic suspension lift kit for the Jeep Wrangler JK, with front and rear springs and front and rear spacers included. It fits the 70th Anniversary, Rubicon, Sahara, Sport, Unlimited and X models, including Rubicon.
The kit includes 4 inch lift coil springs, front sway bar disconnects, rear sway bar links, a rear track bar bracket, bump stops and all necessary hardware. It also includes eight bump stops and brake lines. It allows up to a 37 inch tire, with aftermarket wheels of 4.5 inch backspacing or less.
This is not an all-inclusive kit. A front adjustable trackbar and adjustable control arms are needed for proper alignment and drivability. Driveshaft work is advised, and 2012 and later JKs require exhaust spacers or another exhaust modification.
Key features
- 4 inch lift
- Front and rear springs
- Front and rear spacers
- Front sway bar disconnects and rear sway bar links
- Rear track bar bracket
- Eight bump stops
- Brake lines included
Shock choice for basic lifts
A basic lift gives a fresh ride height with a simpler parts list, so the rest of the suspension does most of the work. Because shocks are not included, the choice of shock affects ride quality, control and how the vehicle handles on pavement and trail. Match the shock length to the new ride height so the shock has room to compress and extend without bottoming out.
Shops and enthusiasts often add a trackbar and adjustable control arms at the same time as the springs, since those parts keep the axles aligned under the vehicle. Bump stops also play a role on rough roads by limiting full compression. Inspect them with the springs during installation, and keep an eye on any worn bushings or joints that were already in the old system.
- Choose shocks that match the new ride height
- Add an adjustable trackbar for alignment
- Inspect bushings and joints during installation
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1151421 |
| UPC | 843885019909 |
| Lift | 4 inch |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Rear lift method | Coil springs |
| Bump stops | 8 |
| Shocks | Not included |
Vehicle fitment
The kit covers the 2007–2015 Jeep Wrangler (JK), including 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X models.
JK model years outside 2007–2015 and the JL fall outside this fitment. Compare your vehicle’s year, model and trim with the fitment before ordering.
Installation notes
Plan on a front adjustable trackbar and adjustable control arms to achieve proper alignment and drivability. Driveshaft work is a good idea, and 2012 and later JKs need exhaust spacers or another exhaust modification.
What’s included
The kit includes 4 inch lift coil springs, front and rear springs, front and rear spacers, front sway bar disconnects, rear sway bar links, a rear track bar bracket, eight bump stops, brake lines and all necessary hardware.
Not included: Shocks, and the front adjustable trackbar and adjustable control arms needed for proper alignment.









