Overview
The Trail Master TJSPECIAL1 is a complete 4 inch lift kit with springs, lower control arms, shocks, four 33 inch Pro Comp Xtreme MT2 tires and four Trail Master 15×8 black steel wheels. It fits the 1997-2006 Jeep Wrangler (TJ) and the 2004-2006 Jeep Wrangler (LJ), and it is sold as a set of 4 wheels and tires with the suspension.
The kit includes front and rear coil springs, sway bar end links, tubular lower control arms for increased strength and proper geometry, front and rear NCG shocks and a transfer case drop to maintain driveshaft angles. Trail Master says its suspension systems come complete with everything required to raise the vehicle without ordering extra components, and that they are designed to limit wear on factory ball joints and steering components and to reduce noise and vibration.
The tire and wheel package adds center caps and lug nuts. Pro Comp says its Xtreme M/T 2 tires come with a 40,000 mile tread wear warranty. TPMS sensors are sold separately.
Key features
- 4 inch lift with front and rear coil springs
- Tubular lower control arms for increased strength and proper geometry
- Front and rear NCG shocks
- Sway bar end links
- Transfer case drop to maintain driveshaft angles
- Set of 4 Pro Comp XMT2 tires, 33 inch
- Set of 4 Trail Master 15×8 black steel wheels
- Center caps and lug nuts included
- The Xtreme M/T 2 tires carry a 40,000 mile tread wear warranty.
Tires and wheels after the lift
A lift changes tire position, so the tires and wheels need a check before regular driving. Turn the wheels from lock to lock and watch for rubbing on the fender liners, control arms and brake lines. The new tires should be balanced, and the spare should be checked for clearance under the body. Tire pressure monitoring sensors are not part of this package, so confirm how your vehicle will handle them before the new wheels are mounted.
Because the suspension and steering are changed together, the components around them deserve attention too. Inspect the lower control arm bushings, shock mounts and sway bar end links after the first trail trips and at every service. Look for cracks, leaks from the shocks and clunking over bumps, which point to a worn part. Re-torque fasteners after the first miles of driving and keep a record of the alignment.
- Check tire clearance at full steering lock
- Balance the tires after mounting
- Inspect control arm bushings at each service
Specifications
| Brand | Trail Master (listed under Genuine Packages) |
|---|---|
| Part number | TJSPECIAL1 (also ADDTJSPECIAL1) |
| UPC | 70000727250 |
| Product type | Complete lift kit with tires and wheels |
| Lift height | 4 inch (3 to 4.99 inches range) |
| Suspension type | Coil spring kit |
| Rear lift method | Coil springs |
| Shocks | Included (front and rear NCG) |
| Tires | Set of 4, 33 inch Pro Comp XMT2 |
| Wheels | Set of 4, Trail Master 15×8 black steel |
| Hardware | Center caps and lug nuts included |
| TPMS sensors | Sold separately |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the TJSPECIAL1 covers the 2004-2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon) and the 1997-2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X).
Only the Wrangler TJ and LJ are listed. The Wrangler YJ, JK and JL, and the Jeep Gladiator, are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle components are safety-critical, so professional installation is the safer choice. Torque every fastener to the specified values, have the tires mounted and balanced, check clearance to the fenders and control arms, and have the alignment and driveshaft angles checked after the lift.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
Front and rear coil springs, sway bar end links, tubular lower control arms, front and rear NCG shocks, transfer case drop, four 33 inch Pro Comp XMT2 tires, four Trail Master 15×8 black steel wheels, center caps and lug nuts.
Not included: TPMS sensors are sold separately.






