Overview
The TeraFlex 1355210 is a 2.5 inch performance spacer kit with shock extensions for the Jeep Wrangler JK and JKU. It fits two-door and four-door 2007 to current Wrangler JK models, and it covers the 2007–2015 JK models in the fitment range.
The kit includes 2.5 inch front spring spacers, 2 inch rear spring spacers, four shock extensions, rear sway bar links, rear brake line extensions and all necessary hardware. The shock extensions are included, so the kit does not add shock absorbers.
The spring retention spacer stops the spring from dropping out during extreme articulation. The kit is a low-cost way to fit larger tires with minimal modification.
Key features
- 2.5 inch lift height
- 2.5 inch front spring spacers
- 2 inch rear spring spacers
- Spring retention spacer design
- Four shock extensions included
- Rear sway bar links
- Rear brake line extensions
- Max tire diameter 35 inch
Exhaust and driveshaft clearance
Lift height affects the angles of the driveshaft, the exhaust and the transfer case, and a taller setup often needs these parts checked after installation. Shock extensions change the mounting length of the shock, so the travel and the bump stop contact should be confirmed before the first drive. Owners who run larger tires often find that the exhaust is the first part that needs a clearance check.
When choosing a setup, consider how the kit will be used. Low-speed trail use puts more stress on the sway bar links and brake lines than street use, while highway driving shows vibration and driveline problems sooner. Keep the spring retention spacers inspected, since the spring seat carries the load after articulation. Regular greasing of the sway bar links and checks on the shock extensions help the kit last.
- Check exhaust clearance after the first install
- Inspect shock extension threads and fasteners
- Look for driveshaft vibration at highway speed
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1355210 |
| UPC | 843885021209 |
| Lift | 2.5 inch |
| Front spacers | 2.5 inch |
| Rear spacers | 2 inch |
| Shock extensions | Four |
| Max tire diameter | 35 inch |
| Shocks | Not included |
Vehicle fitment
It fits the 2007–2015 Jeep Wrangler (JK), including 70th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X and X models.
Exhaust spacers, part number 2610000, are used on 2012 to 2018 JK and JKU models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stock wheels need offset wheel adapters, part number 1055000, or aftermarket wheels with 4.5 inch backspacing or less. For 2012 and later models, exhaust spacers, part number 2610000, may be needed if the front extended shock length is greater than 24.5 inches.
What’s included
The kit includes 2.5 inch front spring spacers, 2 inch rear spring spacers, four shock extensions, rear sway bar links, rear brake line extensions and all necessary hardware.
Not included: Shock absorbers. The kit uses shock extensions instead, and the shock-equipped version is part number 1255200.
























