Overview
The TeraFlex 1323033 is a 3-inch Alpine CT3 suspension system with Falcon 3.3 shocks for the 2007–2018 Jeep Wrangler (JK) Unlimited 4-door, in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. It is the shock-equipped version of the Alpine CT3 system and uses the same fully adjustable Alpine flexarms.
The Falcon shocks and coil springs were designed together to improve compression and rebound, which supports vehicle stability. The Alpine flexarms are bolt-on and can be tuned for pinion and caster angles and tire position. The adjustable front track bar and rear track bar bracket limit side-to-side movement. The system provides full suspension articulation, reduces brake dive and squat under acceleration, and is designed to reduce noise, vibration and harshness. It is built to keep the suspension stable in both compression and rebound, combining trail capability with a smooth road ride.
Key features
- Falcon shocks front and rear, included
- Bolt-on, fully adjustable Alpine flexarms
- Adjustable front and rear roll centers
- Heavy-duty adjustable track bars that limit side-to-side movement
- Coil springs designed to work with the Falcon shocks
Setting up the flexarms
Adjustable flexarms let the owner set pinion and caster angles and tire position, so the front and rear geometry can be tuned to the tires and loads being run. Changing one setting often affects the others, which is why a full alignment check matters after any adjustment. Start with a baseline reading, then change one setting at a time and note the results.
Track bars and shocks work alongside the flexarms. A worn track bar end or a tired shock can make a tuned setup feel loose, even when the arms are set correctly. Inspect the bushings, mounting hardware and shock bodies after rough trail sessions, and replace worn parts in pairs on the same axle so both sides stay matched.
- Flexarm bushings for play or cracking
- Track bar ends for looseness
- Shock bodies for leaks after trail use
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1323033 |
| Type | 3-inch suspension system with shocks |
| Lift height range | 0 to 3.5 inches |
| Front shocks | Falcon 3.3 |
| Rear shocks | Falcon 3.3 |
| Rear lift component | Coil springs |
| Fitment type | Direct fit |
Vehicle fitment
It is for the 2007–2018 Jeep Wrangler (JK) Unlimited 4-door, in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
It fits the Unlimited 4-door JK only. The 2-door and the JL are not covered. Check the year, model and trim against your vehicle before ordering.
Installation notes
The flexarms change the caster, pinion and anti-squat geometry, so have the alignment set and the driveline angles checked after installation.
What’s included
Alpine flexarms, adjustable track bars, Falcon 3.3 shocks front and rear, and the coil springs.









