Overview
The Smittybilt SRC roll cage kit 76903 is a seven-piece steel roll cage for the 2-door Jeep Wrangler JK. It is built to strengthen the factory roll bar into a solid base in a rollover, and it bolts in without drilling.
The kit is built from 1020 DOM tubing with a .120 wall, and each piece attaches with the Knuckle system. The Knuckle connects to the factory roll bar with a pivot at one end and grade 10 fasteners at the other.
Key features
- Seven-piece kit with front down bars and a rear cross bar
- Knuckle system with a unique pivot and fastening point at the factory roll bar
- Grade 10 fasteners
- Front down bars with built-in tubular grab handles
- Satin black powder coat finish
- No drill installation
Before you bolt it on
A roll cage is meant to protect the occupants if the vehicle rolls, so the factory roll bar it attaches to has to be in sound condition. Look for cracks, rust at the mounting points and bent sections before fitting any add-on. A cage cannot make up for a weakened base.
Bars with sharp edges and tight clearances can be hard on arms and heads, so check the cage with the doors and top in place. Take time to confirm that the grab handles and down bars clear the seats and any soft-top hardware. Once the cage is fitted, check the fasteners after the first off-road outing and again after rough trails.
Any changes to the factory covers should be planned in advance, since they affect the look and fit of the vehicle. Keep the hardware and modified parts organized so the installation can be reversed if needed.
- Inspect the factory roll bar for cracks and rust
- Check clearance to seats and top hardware
- Recheck fasteners after rough trails
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76903 |
| Kit size | 7 pieces |
| Tubing | 1020 DOM, .120 wall |
| Attachment | Knuckle system, grade 10 fasteners |
| Installation type | Bolt-in, no drilling |
| Finish | Satin black powder coat |
| Warranty | 5-year limited |
Vehicle fitment
It is for 2-door Jeep Wrangler JK models from 2011 to 2018.
Confirm fit for your vehicle’s year, model and trim before ordering. This kit is for 2-door models only.
Installation notes
The kit bolts in with no drilling, but the factory roll bar covers must be modified for it. The rear cross bar does not work with bowless tops, so check your top style before installing. Soft goods and most factory and aftermarket tops are compatible.
What’s included
The seven-piece SRC roll cage kit with the Knuckle system attachments, grade 10 fasteners, front down bars with grab handles and a rear cross bar.
Not included: the modification to the factory roll bar covers, which the kit requires.









