Overview
The Poison Spyder 13-18-020 is a rear spreader bar kit for the 1981–1983 Jeep CJ5, the 1981–1986 Jeep CJ7 and the 1987–1995 Jeep Wrangler (YJ). It adds rear protection to the stock Jeep roll bar.
The kit consists of a rear spreader bar and two center stringers. The stringers tie the main hoop of the stock roll bar to the rear spreader. All components are made from 1.75-inch OD, .120 wall DOM tubing. Each piece is CNC laser notched and NC-bent, so the parts fit together without extra notching, fitting or grinding. Poison Spyder recommends using the bar with its Trail Cage Kit to build a complete full cage.
Key features
- Rear spreader bar and two center stringers for the stock roll bar
- 1.75-inch OD, .120 wall DOM tubing
- CNC laser notched and NC-bent for quick installation
- Fits the CJ5, CJ7 and YJ Wrangler
- Designed to pair with the Trail Cage Kit
Pairing with a trail cage
A rear spreader bar ties the stock roll bar together at the back of the Jeep, so the stringers carry some of the load from the rear of the roll bar into the bar. A trail cage pairs well with this bar for a more complete build. Pairing gives the rear structure a more consistent path for load, but the welds at each joint do most of the work, so they must be sound.
Before welding, check the stringers and bar against the stock roll bar and the body. Confirm they do not interfere with the tailgate, spare tire or rear fenders. Inspect the joints after rough trail use for hairline cracks, and look for paint cracks around the welds. Keep an eye on the stock roll bar mounting bolts too, since they carry load from the roll bar.
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-18-020 |
| UPC | 614901724547 |
| Tubing | 1.75-inch OD, .120 wall DOM steel |
| Installation type | Weld in |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1981 to 1983 Jeep CJ5 (Base, Laredo, Limited and Renegade), the 1981 to 1986 Jeep CJ7 (Base, Laredo, Limited and Renegade) and the 1987 to 1995 Jeep Wrangler (YJ) in several trims.
Confirm your vehicle’s year, model and trim before ordering. Check the year against the 1981 to 1986 CJ range before welding.
Installation notes
This kit is weld-in and is not a bolt-on part. Weld quality matters on roll bar components, so have an experienced welder do the installation.
What’s included
The kit includes one rear spreader bar and two center stringers.
Not included: the Trail Cage Kit, which is a separate product that Poison Spyder recommends pairing with this bar.














