Overview
The Skyjacker Suspension Link Kit, part number SKYDLL452, is a pair of suspension links for a 4 to 5 inch lift. Suspension links control axle position once a lift changes the suspension geometry, so the links should match the lift height you run. The kit is sold as a universal fit, and links are sized to a specific vehicle and lift, so confirm fit for your vehicle before ordering.
Setting up after the lift
Suspension links fix the axle in place fore and aft, so their length and their mounting points decide how the axle sits once the lift is in. A link that is slightly off can pull the axle out of square, change the driveline angle and wear the joints faster. When the links are installed, have the alignment and driveline angles checked so the setup is measured rather than guessed.
Bushings and mounts deserve the same attention. Rubber that has cracked or softened lets the axle move under acceleration and braking, which can make the ride feel loose. Replacing worn bushings during the install keeps the geometry consistent and avoids repeating the job later.
- Look for cracked or hardened bushings before reuse
- Check the mounts on the frame and axle for wear
- Recheck alignment after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYDLL452 |
| Type | Suspension link kit |
| Lift height | 4-5 in. |
| Quantity | Pair |
Vehicle fitment
Skyjacker lists Universal Fit. No year, make or model is named, so do not assume the links bolt on to a given vehicle without checking the lift height and mounting points first.
Links for one lift height may not suit another. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Links set axle position and driveline angles, so have the alignment and driveline angles checked after installing a lift-height link kit.
What’s included
A pair of suspension links. Check the package contents against your installation before starting.









