Overview
The TeraFlex 1316005 is an Alpine adjustable long control arm kit for the 2018–2026 Jeep Wrangler (JL) and Wrangler Unlimited, for lifts from 3 to 6 inches. It provides complete alignment adjustability for those models.
On higher lifts, the long arms and brackets reposition the frame-end control arm mounting points. That restores near factory orientation and reduces bushing stress during droop and shock load carried through the arms. The kit can be added to an existing suspension lift.
Key features
- Adjustable long control arms
- Suitable for 3 to 6 inch lifts
- Frame-end mounting points repositioned on higher lifts
- Maintenance-free, factory-style bushings
- Covers front and rear, upper and lower positions
Long arms and higher lifts
Long control arms change the length and angle of the arm, so the frame-end mounts and bushings carry more load on higher lifts. Droop and shock loads pass through the arms, which is why the bushing condition and the mounting hardware matter. Good setup keeps the arm angles closer to the factory layout, and that helps the joints last.
Before installation, confirm the bracket kit fits your model and that the mounting hardware is complete. After installation, inspect the bushings and bolts after the first few drives, then again after rough trail use. Recheck the alignment when the lift height changes, since the arm angles shift with each adjustment.
- Check bracket bolts for torque after the first drive
- Inspect bushings for cracking after hard trail use
- Re-check alignment after any lift change
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1316005 |
| Position | Front and rear, upper and lower |
| Type | Tube |
| Lift range | 3 to 6 inch |
| Bushings | Maintenance-free, factory-style |
| Bracket kit | Alpine Long Arm Bracket Kit, not included: 1958002 for JL 2-Door, 1958000 for JL 4-Door |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler (JL), in 2-door and Unlimited 4-door models, including Rubicon, Sport, Sport S, Moab and Sahara.
The Gladiator and the JK and earlier Wrangler generations are outside its fit. Confirm fit for your vehicle’s year, model, lift height and trim before ordering.
Installation notes
On lifts above the factory height the Alpine Long Arm Bracket Kit is required, and it is sold separately. Have the alignment checked after installation.
What’s included
The Alpine long control arm kit. The Alpine Long Arm Bracket Kit is not included.
Not included: the Alpine Long Arm Bracket Kit, which is 1958002 for the JL 2-Door and 1958000 for the JL 4-Door.









