Overview
The Pro Comp 52001B is a Pro Runner upper control arm with 1.25-inch Uniball ball joints and heavy-duty chromoly construction, made for lifted, leveled or stock trucks. It replaces factory upper arms that have weak ball joints and stamped steel construction, which are not built for off-road use.
Oversized stainless steel FK Uniball joints carry the load at each end of the arm. Reinforced bushing mounts keep the arm from flexing under suspension travel, and the large PTMEG pivot bushings use zerk fittings for greasing.
Because no vehicle is named, compare the mounting points and the 1.25-inch joint size with your factory upper arm before ordering.
Key features
- 1.25-inch Uniball ball joints
- Heavy-duty chromoly tubular construction
- Reinforced bushing mounts
- Large PTMEG pivot bushings with zerk fittings
- Zerk dust caps included
- Black powder coat finish
Off-road loads and arm design
An upper control arm takes sideways and braking loads from the wheel and passes them to the frame through its pivot bushings. Off-road, these loads come in sharp hits, so the arm’s tubing, the bushing mounts and the ball joint all work together to resist flex.
Heavier tubing and reinforced mounts reduce flex, but they do not change the arm’s geometry, so the mounting points still need to match your truck. Large pivot bushings with grease fittings allow service without removing the arm, which helps on trucks driven hard.
Inspect the arm after rough trail use. Look for bent tubing, cracked welds, loose pivot hardware and worn bushings. Keep the dust cap in place to protect the uniball from grit.
- Look for bent tubing or cracked welds
- Torque pivot hardware to specification
- Grease the bushings on a regular schedule
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 52001B |
| UPC | 614901099690 |
| Position | Front upper |
| Ball joints | 1.25-inch Uniball, stainless steel FK |
| Tubing | Heavy-duty chromoly, tubular |
| Bushings | PTMEG pivot bushings with zerk fittings |
| Dust caps | Zerk dust caps included |
| Finish | Black powder coat |
Vehicle fitment
No year, make or model is named for the 52001B, so fitment is unknown. Confirm your vehicle’s year, model and trim before ordering.
Confirm the arm against your vehicle’s mounting points before ordering, since no generation or model is named for this arm.
What’s included
One upper control arm with zerk dust caps.































