Overview
The Skyjacker JLL01 is a pair of standard link control arms for the front and rear lower suspension positions. Control arms connect the axle to the frame and guide its movement, and these arms use a polyurethane bushing at each end. Skyjacker calls them value flex control arms.
Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Polyurethane bushing on both ends of each arm
- Standard link design for lower control arm positions
- Sold as a pair
- Front and rear lower positions
Control arm geometry and bushings
Control arms locate the axle and set the suspension geometry, so small changes in their position affect steering feel, tire wear and ride. Polyurethane bushings resist wear better than rubber in many applications, but they transmit more road vibration and can squeak when dry. Check each bushing for cracks, splits or looseness, and keep the arms free of rust at the mounting points.
Before choosing standard link arms, confirm the vehicle fit, then compare the bushing ends with the arms you are removing. Mismatched mounting points or bushing sizes can cause binding. Once installed, have the alignment checked, because control arm changes shift caster and toe. Replacing both sides at the same time keeps the suspension balanced.
- Inspect bushings for cracks, splits or looseness
- Check mounting points for rust and bent tabs
- Schedule a wheel alignment after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JLL01 |
| UPC | 803696180984 |
| Product type | Standard link control arms |
| Quantity | Pair |
| Position | Front and rear lower |
| Bushings | Polyurethane, both ends |
| Fitment | Direct fit (vehicles not named) |
Vehicle fitment
No vehicle is named for this part, so confirm fit for your year, model and chassis code before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Control arms set the geometry of the suspension, so have the wheel alignment checked after the arms are installed.
What’s included
A pair of control arms. Check the hardware needed for your mounts before installing.







