Overview
The Skyjacker RR231 is a slip yoke eliminator kit for the NP231 transfer case. It replaces the slip yoke with a fixed yoke and a 32-spline output shaft, and it lengthens the drive shaft by 4.5 inches. The kit targets vibration on lifted Jeep models, where the drive shaft angle gets steep once the transfer case is raised.
It fits the 1984–2001 Jeep Cherokee (XJ), the 2007–2016 Jeep Wrangler (JK), the 2004–2006 Jeep Wrangler (LJ) and the 1997–2006 Jeep Wrangler (TJ), across the trims in its fitment range.
Key features
- Fixed yoke replaces the slip yoke
- 32-spline output shaft for off-road and on-road use
- Increases drive shaft length by 4.5 inches
- Includes a new output shaft and extension housing
- Part of the Rock Ready line
Driveline angles and vibration
A slip yoke eliminator changes how the drive shaft connects to the transfer case, so the shaft angles and length need to work together. Raising a Jeep changes those angles, and the resulting vibration is often felt at speed or under light throttle. Eliminating the slip yoke removes one source of slip, which is why these kits are common on lifted trucks.
Because the drive shaft length changes, the driveline should be inspected after installation. Check the U-joints, the yokes and the pinion angle, and look for wear on the transfer case output bearing. A high lift may need a driveshaft or angle adjustment, so plan for that check.
- Check U-joints for play after installation
- Inspect the pinion angle with the truck loaded
- Confirm the transfer case mounts are secure
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RR231 |
| UPC | 803696194653 |
| Product type | Slip yoke eliminator kit |
| Transfer case model | NP231 |
| Replacement yoke type | 1310 CV style yoke |
| Output shaft | 32-spline |
| Drive shaft length increase | 4.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in its Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and the Wrangler models in its fitment range.
Wrangler YJ, Wrangler JL and Grand Cherokee models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the drive shaft length alters driveline angles, so have the drive shaft angles and vibration checked after installation.
What’s included
It includes a new output shaft and a new extension housing. Confirm the drive shaft and mounting hardware needs against your installation before starting.








