Overview
The Rugged Ridge 18676.62 is an oil seal for the slip yoke eliminator on NP231 transfer cases. It is designed for use with the 18676.60 kit, so match it to that kit rather than other SYE kits.
It is a direct replacement Jeep part built to original specifications by Omix-ADA. It fits the 2004-2006 Wrangler LJ and 1997-2006 Wrangler TJ models shown below.
Key features
- Designed for use with the 18676.60 slip yoke eliminator
- Oil seal component, not a complete SYE kit
- Built to original specifications by Omix-ADA
- Transfer case model NP231
- Comes with a limited five year warranty.
Seal replacement basics
An output seal keeps lubricant inside the transfer case where the yoke or shaft passes through the housing. Seals harden and wear over time, and a worn seal can leak gear oil onto the driveline area and leave the transfer case low. Replacing the seal is best done when the housing is already open, because that avoids a second teardown.
Seal lips should be clean and free of nicks before installation, and the sealing surface should be smooth and dry. Use a seal driver so the seal seats square rather than cocked. Fill the case to the correct level after installation and check for leaks before a trail run.
- Inspect the sealing surface for grooves
- Install with a seal driver to keep it square
- Check for leaks after refilling
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18676.62 |
| UPC | 804314123925 |
| Transfer case | NP231 |
| Compatible SYE kit | 18676.60 |
| Tail shaft | Not applicable |
| Replacement yoke | Not applicable |
| Extension housing | Not applicable |
| Warranty | Limited five year warranty. |
Vehicle fitment
It fits these vehicles:
- 2004-2006 Jeep Wrangler LJ (Unlimited, Unlimited Rubicon)
- 1997-2006 Jeep Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
1987-1995 Wrangler YJ models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An oil seal is replaced when the slip yoke eliminator is opened, which means removing the output housing. Use a seal driver and the proper hand tools, and follow the instructions for the 18676.60 kit before fitting this seal.
What’s included
One oil seal for the slip yoke eliminator.
Not included: the 18676.60 slip yoke eliminator kit, which the seal is designed to work with.







