Overview
The Rugged Ridge 15102.31 is a 50-foot blue synthetic winch rope made from Dyneema SK-75 fiber, a replacement for a winch that would otherwise run steel cable. It is universal fit, so it is not designed for a single vehicle model.
Many competition off-road drivers choose synthetic rope for its strength and light weight. The twelve UV-treated strands are woven for strength and offer a strong power-to-weight balance compared with wire rope. Because the rope does not store energy like steel, a broken line is much less likely to cause severe whiplash injuries.
Key features
- Genuine Dyneema SK-75 fiber imported from the Netherlands.
- Woven from twelve UV-treated strands.
- Does not kink or splinter.
- Comes with a protective sleeve that prevents overheating on the winch drum.
- Black powder coated latched hook with a stainless steel thimble.
- Pre-terminated end for straightforward installation.
Preparing a winch for synthetic rope
Moving from steel cable to synthetic rope involves more than swapping the line. Check the winch drum for burrs or sharp spots that could cut the fiber, and make sure the fairlead rollers turn freely and are clean. Confirm the winch’s rated capacity covers the load you expect, and plan your pulls with that rating in mind.
Spool the new line with steady, even tension so the first wraps lie snug and the layers stack cleanly. Avoid letting the rope run over sharp edges or drag on the ground. Synthetic rope responds best to gentle loading, so take up slack slowly before pulling hard.
- Inspect the drum for sharp spots
- Keep the fairlead rollers clean and turning
- Take up slack gently before loading
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15102.31 |
| UPC | 804314220563 |
| Type | Rope |
| Length | 50 feet |
| Color | Blue |
| Fiber | Dyneema SK-75 |
| Construction | Twelve UV-treated strands |
| Hook | Black powder coated latched hook |
| Thimble | Stainless steel |
| Sleeve | Protective sleeve included |
| Termination | Pre-terminated end |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so no single vehicle applies. Fit depends on the winch rather than the vehicle: the replacement rope mounts to your current winch once the steel cable and roller fairlead are removed. Check that the winch and its fairlead suit this 50-foot synthetic line before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by removing the current steel cable and roller fairlead from the winch. The rope is pre-terminated, so the new line arrives with its hook and thimble already attached. Rugged Ridge names its ATV/UTV Aluminum Hawse Fairlead, part number 61238.01, as the piece that completes the setup. Keep clear of the line while the winch is loaded.
What’s included
The kit includes the 50-foot rope with its protective sleeve, latched hook and stainless steel thimble.
Not included: The winch itself, and the ATV/UTV Aluminum Hawse Fairlead (61238.01), which is named to complete installation but is not part of the kit.









