Overview
The Warn 25430 is a 50 foot wire rope extension for Warn winches, made of galvanized aircraft wire rope. It is intended to extend the reach of a winch line.
Both ends are finished with swaged loops. Universal fit is listed, so the extension is chosen by winch and line length rather than by vehicle.
Key features
- Galvanized aircraft wire rope to help resist corrosion
- 50 feet of extension length
- Swaged loops on both ends
- It is universal fit, so choose it by winch and line length.
Extending a winch line
An extension adds rope to a winch line that is too short for the job, such as reaching a distant anchor point. Because it joins the existing line through its swaged loops, the connection point becomes a spot to inspect each time the winch is used. Keep the loops clean and free of grit, and avoid running the joint over a sharp edge.
Galvanized rope resists corrosion better than bare steel, but it still needs care. Rinse off road salt and mud, dry the line before storing it, and look for white or red corrosion at the loops. A kinked section should be retired rather than straightened, since the damage weakens the strands.
- Measure the existing line before ordering
- Inspect both swaged loops after each use
- Keep the joint off sharp edges
- Replace the extension if kinks or corrosion appear
Specifications
| Brand | Warn |
|---|---|
| Part number | 25430 |
| UPC | 1274825430 |
| Material | Aircraft wire rope, galvanized |
| Length | 50 feet |
| Color | Wire |
| Type | Cable |
| Ends | Swaged loop on both ends |
| Fitment | Universal fit |
Vehicle fitment
This extension is not vehicle-specific. Compare its 50 foot length with the line your Warn winch already uses before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A 50-foot wire rope extension with a swaged loop on each end.









