Select your vehicle

Warn Terminal Kit – 3/8in. Wire Rope – 16464

Warn

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Warn terminal kit for 3/8 in. wire rope, part number 16464
  • Universal fit; match it to your winch and rope size
  • UPC 1274816464

Description

Overview

The Warn 16464 is a terminal kit for 3/8 in. wire rope, part number 16464 from Warn. It falls under winch cable and synthetic rope, and Warn shows it as universal fit rather than for a specific vehicle.

Use it when you need a terminal for 3/8 in. wire rope on a winch setup. Because no vehicle is named, match the rope diameter and your winch model to the kit before installing it.

Key features

  • Terminal kit for 3/8 in. wire rope
  • Warn part number 16464
  • Universal fit, so match the kit to your rope diameter and winch.
  • UPC 1274816464

Terminating wire rope safely

A terminal is the point where the rope is secured to the winch or hook, so it carries the full working load of the line. A poorly made termination can slip or pull out, which is why the fitting should be installed with care and checked before every pull. Terminal style and rope diameter must match, because a fitting sized for a different rope will not hold properly.

Before installing, inspect the rope end for broken strands, birdcaging and kinks. Clean grit and grease from the area where the fitting will sit. If the terminal uses a crimp or swage, make sure the tool and sleeve are sized for the rope in use.

Once fitted, load the rope gently and watch it wind onto the drum. Recheck the terminal after the first few uses, since new fittings can settle under the first loads.

  • Match rope diameter to the terminal before buying
  • Inspect strands for damage before installing
  • Recheck the fitting after the first loads

Specifications

Brand Warn
Part number 16464
UPC 1274816464
Wire rope size 3/8 in.
Fitment Universal fit

Vehicle fitment

The kit is universal fit and is not tied to a specific year, make or model.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Winch model, battery voltage and serial number identify the correct replacement parts for Warn truck and Jeep winches. On planetary gear models the serial number is on the gear end housing. On upright spur gear models (M8274), look on the top of the winch housing.

What’s included

Check the package contents against your installation before starting.

SKU: WAR16464 Category:

Specification

Shipping weight 0.06 lbs
Package dimensions 6.80 × 6.00 × 0.80 in
brands

Questions & Answers

What is the Warn 16464?

The Warn 16464 is a terminal kit for 3/8 in. wire rope, sold under part number 16464 with UPC 1274816464. It falls in the winch cable and synthetic rope category and is made for 3/8 in. rope.

Does the Warn 16464 fit my Jeep?

No vehicle is tied to this kit. It is a universal fit, so it is not tied to a particular Jeep year, model or trim. Confirm rope diameter and winch compatibility before installing it.

What size wire rope does the Warn 16464 use?

It is made for 3/8 in. wire rope. Check the rope diameter on your winch before fitting, and confirm the kit suits your rope construction and winch capacity before installing.

Can I reuse an old terminal on a new rope?

Usually not. A terminal that has been loaded, bent or damaged can weaken, so a new rope should be fitted with a terminal that matches its diameter. Inspect any reused hardware closely, and replace it if it shows wear or deformation.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon