Overview
The Rubicon Express Rear Bump Pad RE1387 is a rear bump stop extension for the JK Wrangler, in 2-door and 4-door models. The pad gives 2″ less clearance than factory and includes mounting bolts and nuts.
The bump stop extensions reduce the stock JK Wrangler rear axle travel, which allows the use of larger tires. They mount in the rear position as a direct fit.
Key features
- Rear bump stop extension
- 2″ less clearance than factory
- Helps reduce suspension travel for larger tires
- Fits 2-door and 4-door models
- Mounting bolts and nuts included
- Direct fit
Before fitting larger tires
Bump stops limit how far the axle can travel toward the body before the suspension compresses fully. Changing their length alters when that limit is reached, so the rear suspension behaves differently at full compression. Larger tires already change the geometry, and a shorter stop can help keep them from rubbing the body or the wheel wells during normal articulation. Before fitting these pads, look at how much travel the stock setup gives and whether the tires you plan to run would contact the body at that point.
After installation, inspect the rear shocks, brake lines and driveline through full compression and rebound. Look for stretched brake hoses, pinched wiring and driveshaft angles that have become steep. Bump pads that are worn or cracked should be replaced, and the bolts should be checked periodically because they carry impact loads each time the suspension bottoms out.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1387 |
| UPC | 614901438062 |
| Product type | Rear bump pad (bump stop extension) |
| Position | Rear |
| Clearance | 2″ less than factory |
| Body styles | 2-door and 4-door models |
| Hardware | Mounting bolts and nuts included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK in 2-door and 4-door models.
Other Wrangler generations, such as the TJ and JL, are not covered. This is a rear bump pad only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands or a lift on level ground, never on a jack alone. Tighten all fasteners to the required torque, and re-check fastener tightness after the first miles of driving.
Suspension work changes ride height, steering geometry and brake line and driveline clearances, so professional installation is recommended, and a wheel alignment is advised afterward. Check your local regulations on vehicle lift height and equipment.
Because the pad reduces axle travel, check that the rear shocks, brake lines and driveline still have enough clearance through full suspension travel after installation.
What’s included
Rear bump pads with mounting bolts and nuts.
Not included: tires, shocks or other suspension parts.









