Overview
The Rubicon Express RE9831 weld-on bump stop relocation pads replace the factory brackets on the rear of the Jeep Wrangler JK. They are steel bump pad brackets that are welded on, and they allow the bump stops to be positioned correctly after the rear pinion has been rolled up for proper driveshaft angle on a lifted vehicle.
The relocated pads are designed to eliminate interference with the rear track bar. They fit the 2008 to 2018 Jeep Wrangler JK in several trims and are sold as a pair.
Key features
- Steel bump pad brackets
- Weld-on only
- Corrects bump stop positioning after the pinion is rolled up
- Eliminates interference with the rear track bar
- Replaces factory brackets
- Sold as a pair
Welding and fit checks
Weld-on brackets are a permanent change to the rear axle, so the welding should be planned before the parts are cut or placed. Clean the mounting surfaces to bare metal, fit the pads in position, and confirm the bump stop contact points before tacking anything. A welder experienced with suspension brackets will keep the heat away from nearby components such as brake lines and the track bar mount.
After the rear pinion is rolled up, the bump stop position may need a check because the axle sits at a different angle. Confirm that the track bar moves freely through full travel and that the stop engages without binding. Inspect the welds once the vehicle is on the ground and again after the first few off-road trips.
- Grind mounting surfaces to bare metal
- Dry-fit the pads before welding
- Check track bar travel with the pads installed
- Inspect welds after the first off-road trips
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9831 |
| UPC | 614901442236 |
| Position | Rear axle |
| Type | Steel bump |
| Installation | Weld-on only |
| Sold as | A pair |
Vehicle fitment
It fits the 2008 to 2018 Jeep Wrangler (JK), including the Unlimited, Rubicon, Sahara and Sport trims and their anniversary editions.
The list covers only the JK, so other Wrangler generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets are weld-on only, so installation requires welding. Position the pads after the rear pinion is rolled up so the bump stops engage correctly on a lifted vehicle.
What’s included
A pair of steel bump pad relocation brackets.



