Overview
The Rubicon Express RE1399 is an extended bump stop that replaces the factory bump stop with an extended steel unit fitted with a polyurethane pad. It is intended for 33-inch and bigger tires.
The design is clean and is built to stay in position rather than shift. It is a direct fit.
Key features
- Extended steel bump stop unit
- Polyurethane pad
- Replaces the factory bump stop
- Intended for 33-inch and bigger tires
- Design said not to shift like other styles
Clearance and travel
Extended bump stops change where the suspension meets its limit, so they are usually chosen alongside a larger tire. When the tire grows, the axle can move further in relation to the frame before it would otherwise stop, and the stop is what keeps the tire from contacting the body or the suspension components.
The most common issue with a larger tire is rubbing at full compression, particularly on the inside of the wheel well and near the shock mounts. Before installation, measure clearance with the vehicle at full compression, not only at rest. The stop may need to be adjusted or the tire may need a different offset.
Polyurethane pads hold up well to repeated contact, but they should still be looked at for cuts, flattening or separation from the steel body. A worn pad changes the stop height and can alter how the suspension behaves near the end of its travel.
- Measure tire clearance at full compression, not only at rest
- Inspect the polyurethane pad for cuts or flattening
- Check shock mounts and brake lines for contact after install
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1399 |
| UPC | 614901438178 |
| Body | Extended steel |
| Pad | Polyurethane |
| Tire size | 33 inches and bigger |
| Fitment | Direct fit |
Vehicle fitment
Choose it by the tire size you run and the factory bump stop it replaces.
Confirm your vehicle’s year, model and trim before ordering, and check the clearance for your tire size.

