Overview
The Omix-ADA front jounce bumper is a replacement part for 2007 to 2017 Jeep Wrangler JK models, including Rubicon and Unlimited. It measures 3.25 inches tall and 2 inches in diameter.
The bumper is made of dense foam rubber and installs into the upper coil spring isolator inside the coil on the front of the vehicle. It is sold for either the driver or passenger side and works on 2-door and 4-door models.
Key features
- Front jounce bumper design
- Dense foam rubber construction
- Installs in the upper coil spring isolator
- Fits driver or passenger side
- Works on 2 and 4-door models
Jounce bumpers and coil travel
A jounce bumper works inside the coil spring to cushion the suspension near the end of compression. It helps prevent the spring and upper mount from striking hard against their stops, which can reduce stress on the rest of the front end. Foam rubber is a common material for this job because it compresses gradually and recovers after each hit.
Before replacing the bumper, inspect the upper coil spring isolator and mounting area for cracks, dry rot or flattened foam. Off-road use with larger tires or a lift can change how far the spring compresses, so the bumper may be used more often. Replacing a worn bumper along with the upper isolator keeps the front end consistent on both sides of the vehicle.
- Inspect the upper coil spring isolator
- Check for dry rot or flattened foam
- Replace worn bumpers in a matched pair
- Recheck after a lift or larger tires
Specifications
| Brand | Omix-ADA |
|---|---|
| UPC | 804314291570 |
| Type | Front jounce bumper |
| Material | Dense foam rubber |
| Height | 3.25 inch |
| Diameter | 2 inch |
| Position | Front, driver or passenger side |
| Models | 2-door and 4-door |
Vehicle fitment
It fits 2007 to 2017 Jeep Wrangler JK models, including Rubicon and Unlimited versions. It does not cover the 2018 and newer Wrangler JL or earlier TJ and LJ generations.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper sits in the upper coil spring isolator inside the coil, so the coil spring must be accessible from the front of the vehicle. Choose the side you need, driver or passenger, because it installs one side at a time.











