Overview
The Rubicon Express Super-Flex front upper adjustable control arm, part RE3723, is an adjustable upper arm for Jeep JL Wrangler and JT Gladiator models. It uses Rubicon Express’s Super-Flex joint and thick wall DOM tubing.
The adjustment range lets you set pinion angle, caster and wheelbase on a short arm suspension. Rubicon Express also sells the arm as a replacement for damaged factory control arms. The arms are powder coated for corrosion resistance and carry the Rubicon Express Advantage Warranty.
Key features
- Adjustable range for pinion, caster and wheelbase
- Super-Flex joint for unrestrained axle movement
- Thick wall DOM tubing
- Powder coated for corrosion resistance
- Covered by the Rubicon Express Advantage Warranty
Alignment after arm changes
Upper control arms set the angle of the axle relative to the frame, so any adjustment shifts how the front end behaves on the road and off it. Pinion angle, caster and wheelbase interact, which means a change to one often requires a check on the others. Work through the settings in a planned order rather than adjusting each arm at random.
Upper arms also see load during braking and on uneven terrain. Inspect the joints and mounting points for play, cracked welds, loose fasteners and torn boots during routine service. A worn joint can introduce steering wander or clunking, and it may be worth replacing the joint alongside the arm when wear shows up. Keep a record of each setting so that future adjustments start from a known point.
- Measure before adjusting so you have a baseline
- Retorque fasteners after the first drives
- Check tire wear after the alignment is done
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3723 |
| Position | Front upper |
| Adjustment | Pinion, caster and wheelbase |
| Joint | Rubicon Super-Flex |
| Tubing | Thick wall DOM |
| Finish | Powder coated |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2020 Jeep Gladiator JT and the 2018–2026 Jeep Wrangler JL, across the trims in that range.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjusting pinion angle, caster and wheelbase changes the alignment, so plan on a front alignment after installation. Set the adjustments before the alignment, and recheck the driveline angles on a short arm suspension.
What’s included
One front upper adjustable control arm, part RE3723.









