Select your vehicle
-13%

Rubicon Express Super-Flex Adjustable Rear Upper Control Arm Set – RE3725

Rubicon Express

Shop Jeep Wrangler JL Control Arms on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Adjustable rear upper control arm set with Rubicon Super-Flex joints
  • Fits the 2018–2026 Jeep Wrangler JL, two-door and four-door
  • Adjusts pinion, caster and wheelbase, or replaces damaged factory arms
  • Thick wall DOM tubing, powder coated; part number RE3725

Description

Overview

The Rubicon Express Super-Flex adjustable rear upper control arm set, part number RE3725, is a tube control arm set for the 2018–2026 Jeep Wrangler JL. The arms are adjustable, so they can set pinion angle, caster and wheelbase, and they can also replace damaged factory control arms.

Rubicon Express builds the arms from thick wall DOM tubing with its Rubicon Super-Flex joint, which the brand says allows the axles to move freely off road. The arms are powder coated for corrosion resistance and covered by the Rubicon Express Advantage Warranty.

Key features

  • Adjustable length for pinion, caster and wheelbase setup
  • Rubicon Super-Flex joint for unrestrained axle movement off road
  • Thick wall DOM tubing
  • Powder coated for corrosion resistance
  • Can serve as a replacement for damaged factory control arms

Setting up the adjustments

Adjustable control arms change the geometry of the rear axle, so the setup affects how the vehicle tracks, how the driveline angles sit and how the tires wear. Pinion angle controls the driveshaft angle at the axle, while caster and wheelbase influence steering feel and stability. Small changes add up quickly, so make one adjustment at a time and measure after each step.

Before buying, consider how much movement your driving needs. Trail use with larger tires often involves more articulation, which puts more load on joints and driveline parts. Inspect the joint, bushings and mounting bolts regularly, and look for play, cracked welds or grease leaks. Retighten the jam nuts after the first few trips, because loosened adjusters can change alignment without warning.

  • Measure before and after each adjustment
  • Check the jam nuts after the first trips
  • Inspect the joint for play or grease leaks

Specifications

Brand Rubicon Express
Part number RE3725
Position Rear upper
Type Tube
Joint Rubicon Super-Flex
Tubing Thick wall DOM
Adjustment Adjustable for pinion, caster and wheelbase
Finish Powder coated
Fitment Direct fit
Warranty Rubicon Express Advantage Warranty

Vehicle fitment

It fits the 2018–2026 Jeep Wrangler JL, in both two-door and four-door models. For a Gladiator, confirm fit for your year, model and trim before ordering.

The list covers Wrangler JL models only, so Wrangler JK and TJ models are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Adjusting the arm length changes pinion angle, caster and wheelbase, so have the alignment and driveline angles checked after installation.

What’s included

One set of adjustable rear upper control arms, as the product title describes.

Fitment

VehicleYearsTrims
Jeep Wrangler (JL)2018–2026Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RE3725 control arms fit a 2020 Jeep Wrangler JL?

Yes. It fits the 2018–2026 Jeep Wrangler JL, so a 2020 model falls within that range. Verify the year, model and trim match your vehicle before purchase.

Do these arms fit a Jeep Gladiator?

The arms are designed for the 2018–2026 Jeep Wrangler JL. Confirm fit for a Gladiator before ordering, since the year, model and trim must match the arm's design.

What do the adjustments change?

Adjusting the arm length changes pinion angle, caster and wheelbase. The arms can also replace damaged factory control arms, which makes a worn set a simpler swap.

Do I need an alignment after a control arm swap?

Yes. Any change to pinion angle, caster or wheelbase changes alignment, so have it checked once the arms are installed. Measuring the driveline angles at the same time helps confirm the setup is correct for daily use and trail work.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JL Control Arms on Amazon